I have been testing on a 4gb Class 4 card and have wondered if the shutdowns might be some kind of read/write problem caused by a more demanding version of CHDK than earlier on a slow card.
Remix 6:- Free memory: Before testing: 8788848 bytes CHDK size 140828 loaded at 0x14B394After testing: 866368 / 140828 / 0x14B394- Zebra: Set Blink 2 u/o 10, Draw over OSD. First session seemed to work through half dozen shots on Continuous. Changed to single shot and it crashed Error 26. Romlog_Zebra_R6 attached. Second session done after the tests below, changed u/o colors to check readings: Displayed correctly in half-press for single shoot and continuous, but often formed orange stripes and striped blocks between shots during the full shutter in Continuous shooting. Did not crash this time. - Histogram: set Always, Blend. Appears to display correctly in different lighting and exposure settings. Didn't crash after about 10 single and 10 continuous shots._ ND Filter: set In. Filter strength (darkening) is barely noticeable, much less intense compared with the CHDK 1.1 Remix you made. "ND" is shown in the Canon Playback details display. Otherwise stable through single and continuous shooting when set both In and Out.Not knowing what you disabled I didn't use SuperFine JPEG or custom ISO as I normally would. I always create a User Menu, major changes to OSD and tweak various default settings, not done on these tests. Don't know how those would affect memory demand.
Zebra - Blink 2 u/o10 Draw OSD(Had to reboot between changes to Zebra for the Memory Info check to change.)Remix6 - 1.3 (stripped version)No Zebra: 876224 CHDK 140828 0x14B394Zebra on: 869088 others sameRemix4 - 1.1 fresh installNo Zebra: Free 794216 Chdk 222940 Ox14B394Zebra on: Free 786528 others same__________________________________________Note: the above 1.1 is a fresh install. I had changed your CHDK 1.1 Remix4 to my usual settings to see how it works. I first tried it that, disabled Overrides but my User Menu and usual OSD changes were there so I realized a clean install would be better. The result showing the memory effect of my normal changes, might have some interest since it's different:Remix4 - 1.1 with changes to OSD, User Menu, etc. No Zebra: Free 789980 CHDK 222940 0x14B394Zebra on: Free 781392 others sameI'll be occupied the rest of this evening but will check again tomorrow. I'm glad to participate - it's a rare camera but maybe some larger CHDK wisdom will come out of it.
Started by cephei
Started by mr.burns
General Discussion and Assistance
Started by ptsneves
General Help and Assistance on using CHDK stable releases
Started by Olgmo1
Started by pigeonhill