Starting script fully automatically (A530) - Script Writing - CHDK Forum
« previous next »
Pages: [1] 2   Go Down

Starting script fully automatically (A530)

  • 10 Replies
  • 6682 Views
*

Offline oliver56

  • *
  • 4
Starting script fully automatically (A530)
« on: 26 / January / 2015, 04:33:08 »
Advertisements
Hello!

I have Canon A530 and want to start script automatically after power up or after pressing shoot button. I know that I can enable autostart option in menu but I have an issue with my camera - it has some sort of hardware problem and the buttons on the right side of display do not work. So I can not access the CHDK menu. Thats why I can not create also an initial cfg file in camera (to modify it in my PC).

Is it possible to manually create a script or cfg file which runs some script after pover up without accessing the menu? Or is this a solution when someone sends me CFG file for A530 and I modify it in my pc to autostart script?

Camera boots in CHDK fine, after booting CHDK graphics appears for a few sec in display

Tanks in advance!

Oliver
Logged
*

Offline zeno

  • *****
  • 891
Re: Starting script fully automatically (A530)
« Reply #1 on: 26 / January / 2015, 04:39:17 »
Oliver

there should be a CFG file in the CHDK directory on the card - CHDK creates one. You can use my CFG Editor to edit it on your computer to set the autostart option. See
  http://www.zenoshrdlu.com/kapstuff/zcfgedit.html

I haven't updated the editor lately. Let me know here if it raises an error.
Logged
A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit
*

Offline oliver56

  • *
  • 4
Re: Starting script fully automatically (A530)
« Reply #2 on: 26 / January / 2015, 05:40:27 »
Thanks for an advice, but there is no cfg file in chdk directory or in SD card root dir. Maybe it is because i have not accessed the setup. Can you send me your cfg file, i try to modify it maybe it works with A530 as well.

Oliver
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Starting script fully automatically (A530)
« Reply #3 on: 26 / January / 2015, 09:02:26 »
Quote from: zeno on 26 / January / 2015, 04:39:17
I haven't updated the editor lately. Let me know here if it raises an error.
Dave : 

In 1.3.0 there are actually four CFG files :
CCHDK4.CFG
OSD__4.CFG
UMENU4.CFG
GPS__4.CFG
Have you been able to keep up with those changes ?



Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline oliver56

  • *
  • 4
Re: Starting script fully automatically (A530)
« Reply #4 on: 26 / January / 2015, 10:15:06 »
I did download build 1.3.0 from http://mighty-hoernsche.de/
If this is what you mean...

Zip does not contain CFG files and they do not appear to SD after booting to CHDK.

Oliver
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Starting script fully automatically (A530)
« Reply #5 on: 26 / January / 2015, 12:51:19 »
Quote from: oliver56 on 26 / January / 2015, 10:15:06
Zip does not contain CFG files and they do not appear to SD after booting to CHDK.
Correct.  The various cfg files are created when you change the default setup of CHDK.

I'm not sure if the CFG files are camera model specific.  I don't think so but philmoz is the expert on those and can probably comment.   If it's not camera specific I'll post one of mine from another camera with "autorun" enabled and a script named autorun.lua selected.

Edit :  attached CFG file configured as stated above
« Last Edit: 26 / January / 2015, 12:58:25 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline reyalp

  • ******
  • 14138
Re: Starting script fully automatically (A530)
« Reply #6 on: 26 / January / 2015, 12:56:42 »
Some settings should get reset, but AFAIK copying cfgs between cameras should not be a problem.
Logged
Don't forget what the H stands for.
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Starting script fully automatically (A530)
« Reply #7 on: 26 / January / 2015, 12:59:44 »
Quote from: reyalp on 26 / January / 2015, 12:56:42
Some settings should get reset, but AFAIK copying cfgs between cameras should not be a problem.
I attached a "clean" S100 cfg file with autorun enabled to my previous post .  Things that change between cameras (like the user selectable <ALT> key might be problematic?
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline oliver56

  • *
  • 4
Re: Starting script fully automatically (A530)
« Reply #8 on: 26 / January / 2015, 15:24:14 »
Thanks waterwingz! Yes your CFG file runs smiley script. ;)

Great! Now just need to replace with my own script.

Zeno, i tried to open waterwingz CFG file with your CFG editor, but it gives "Error - unknown entry at offset 4 id=1000" I got Java v 1.7 and win7.
Logged
*

Offline zeno

  • *****
  • 891
Re: Starting script fully automatically (A530)
« Reply #9 on: 26 / January / 2015, 18:10:34 »
My bad- the editor clearly needs some updating! Sorry I suggested it. I'll try and fix it but it may take some time.
Logged
A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit
Pages: [1] 2   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal