New to CHDK - how do I shoot pictures? - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: [1]   Go Down

New to CHDK - how do I shoot pictures?

  • 3 Replies
  • 2182 Views
*

Offline herchu

  • *
  • 2
New to CHDK - how do I shoot pictures?
« on: 12 / February / 2015, 12:19:41 »
Advertisements
Hi all,
I am new to CHDK, I found about the project today when trying to find out if it was possible to capture in RAW mode from my Canon Powershot SX130 IS. I just upgraded mi camera firmware today , then installed CHDK. For now, I got to the point where I can auto-boot CHDK from a bootable 4Gb FAT16 card. (The card is 8Gb and I was unable to work with two partitions, but nevermind, that is a different question).

My problem is: Both starting the camera with the Power button, or with the Play button, in both cases I am booting into CHDK (the locked card makes it boot). I can navigate CHDK after pressing Alt (the "face" button), but I do not understand how to open the lenses, and shoot pictures....

Am I missing something? how do I take pictures AND use CHDK at the same time?

thanks you :)
Logged
*

Offline herchu

  • *
  • 2
Re: New to CHDK - how do I shoot pictures?
« Reply #1 on: 12 / February / 2015, 12:33:28 »
Nevermind. I figured it out, feeling so stupid at the same time.

So for others new to CHDK: When you have loaded CHDK, pressing the "shoot" button (and if you are NOT in <alt> mode) will open the lenses :)
Logged
*

Offline TMHKR

  • **
  • 77
  • Canon PowerShot SX170 IS (1.01a firmware)
Re: New to CHDK - how do I shoot pictures?
« Reply #2 on: 12 / February / 2015, 14:36:01 »
<ALT> mode is used only for setting parameters and executing scripts. To shoot or record video, always exit <ALT> mode.
Logged
*

Offline reyalp

  • ******
  • 14138
Re: New to CHDK - how do I shoot pictures?
« Reply #3 on: 12 / February / 2015, 16:07:43 »
Quote from: herchu on 12 / February / 2015, 12:33:28
So for others new to CHDK: When you have loaded CHDK, pressing the "shoot" button (and if you are NOT in <alt> mode) will open the lenses :)
On most cameras that don't have a separate play/rec switch, if you want to start in shooting mode, you can just hold down the power button until the lens starts to extend.
Logged
Don't forget what the H stands for.
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal