New to CHDK - how do I shoot pictures? - General Discussion and Assistance

herchu

2

New to CHDK - how do I shoot pictures?

« on: 12 / February / 2015, 12:19:41 »

Advertisements

Hi all,
I am new to CHDK, I found about the project today when trying to find out if it was possible to capture in RAW mode from my Canon Powershot SX130 IS. I just upgraded mi camera firmware today , then installed CHDK. For now, I got to the point where I can auto-boot CHDK from a bootable 4Gb FAT16 card. (The card is 8Gb and I was unable to work with two partitions, but nevermind, that is a different question).

My problem is: Both starting the camera with the Power button, or with the Play button, in both cases I am booting into CHDK (the locked card makes it boot). I can navigate CHDK after pressing Alt (the "face" button), but I do not understand how to open the lenses, and shoot pictures....

Am I missing something? how do I take pictures AND use CHDK at the same time?

thanks you

Logged

herchu

2

Re: New to CHDK - how do I shoot pictures?

« Reply #1 on: 12 / February / 2015, 12:33:28 »

Nevermind. I figured it out, feeling so stupid at the same time.

So for others new to CHDK: When you have loaded CHDK, pressing the "shoot" button (and if you are NOT in <alt> mode) will open the lenses

Logged

TMHKR

77
Canon PowerShot SX170 IS (1.01a firmware)

Re: New to CHDK - how do I shoot pictures?

« Reply #2 on: 12 / February / 2015, 14:36:01 »

<ALT> mode is used only for setting parameters and executing scripts. To shoot or record video, always exit <ALT> mode.

Logged

reyalp

14111

Re: New to CHDK - how do I shoot pictures?

« Reply #3 on: 12 / February / 2015, 16:07:43 »

Quote from: herchu on 12 / February / 2015, 12:33:28

So for others new to CHDK: When you have loaded CHDK, pressing the "shoot" button (and if you are NOT in <alt> mode) will open the lenses

On most cameras that don't have a separate play/rec switch, if you want to start in shooting mode, you can just hold down the power button until the lens starts to extend.

Logged

Don't forget what the H stands for.