SX520HS Porting thread. - page 20 - DryOS Development - CHDK Forum

SX520HS Porting thread.

  • 209 Replies
  • 61662 Views
Re: SX520HS Porting thread.
« Reply #190 on: 15 / July / 2016, 06:53:50 »
Advertisements
Sorry for the late answer I was on a vacation.
Last succesful test= text output
Logs are attached.

*

Offline srsa_4c

  • ******
  • 4426
Re: SX520HS Porting thread.
« Reply #191 on: 15 / July / 2016, 16:16:37 »
Sorry for the late answer I was on a vacation.
Last succesful test= text output
Logs are attached.
Thanks. The benchmark uses the raw buffer for card tests, and the raw buffer's address was calculated incorrectly when camera was started in playback mode. Should be fixed in revision 4660.

Re: SX520HS Porting thread.
« Reply #192 on: 11 / August / 2016, 03:37:43 »
Ohh well... Last night there were some shooting stars expected, so I thought you know let's give it a go and make a few pictures. But then the camera just started crashing over and over again. Everytime I went higher then ISO 800 it would crash.
So here's the Romlog and I hope you can fix this!

*

Offline srsa_4c

  • ******
  • 4426
Re: SX520HS Porting thread.
« Reply #193 on: 11 / August / 2016, 15:10:50 »
Ohh well... Last night there were some shooting stars expected, so I thought you know let's give it a go and make a few pictures. But then the camera just started crashing over and over again. Everytime I went higher then ISO 800 it would crash.
So here's the Romlog and I hope you can fix this!
Unfortunately, I have no idea how to fix this issue.
It has been reported earlier, but only for ISO > 3200. Since ISO values up to 3200 do appear to work (for other testers), you must be using some camera setting that makes a difference. Try finding it and report back.


Re: SX520HS Porting thread.
« Reply #194 on: 12 / August / 2016, 14:42:12 »
Ohh well, I still don't know what caused the problem... but after I had reset anything (so CHDK and Camera settings) it works again... Let's hope it will work for the rest of eternity  :P

Re: SX520HS Porting thread.
« Reply #195 on: 12 / September / 2016, 10:53:29 »
So... uhhmmm... How far is the video function porting? Because I would really like to get a manual focus just staying focused at one point while filming.



Or do I just don't get it?
I saw this: https://chdk.setepontos.com/index.php?topic=5883.msg57798#msg57798
But it didn't really seem to work...


Never mind found out how it works!


So is there a way to use the flash as flashlight on the camera while filming?
« Last Edit: 13 / September / 2016, 10:06:59 by wobelaar »

*

Online reyalp

  • ******
  • 13353
Re: SX520HS Porting thread.
« Reply #196 on: 13 / September / 2016, 16:32:56 »
So is there a way to use the flash as flashlight on the camera while filming?
No, the flash is almost certainly fed by a capacitor, which needs to recharge between shots. You might be able to use the AF assist LED, turned on with set_led in a script.
Don't forget what the H stands for.

Re: SX520HS Porting thread.
« Reply #197 on: 14 / September / 2016, 01:32:32 »
Oké! Thank you!


Re: SX520HS Porting thread.
« Reply #198 on: 22 / March / 2017, 05:26:56 »
Hi, guys!
Thank you for porting CHDK to sx520! Now I have ability to use DNG files. However I've noticed that the colours look different in Raw Therapee compared to the original jpeg. I guess that's because of lacking the colour profiles. That can be fixed manually, however it is hard for me, because I'm partially colorblind (don't see all the shades of red). So it would be cool to get the colours in DNG similar to the ones in jpeg, so I could just work on the exposure, noises, etc. Could you give any advices?

Re: SX520HS Porting thread.
« Reply #199 on: 31 / March / 2017, 08:21:32 »
Hi, guys!
Thank you for porting CHDK to sx520! Now I have ability to use DNG files. However I've noticed that the colours look different in Raw Therapee compared to the original jpeg. I guess that's because of lacking the colour profiles. That can be fixed manually, however it is hard for me, because I'm partially colorblind (don't see all the shades of red). So it would be cool to get the colours in DNG similar to the ones in jpeg, so I could just work on the exposure, noises, etc. Could you give any advices?


Can't you just select a white balance in Raw Therapee? I mean in adobe photoshop raw/lightroom you can just select a white balance like cloudy or something like that. Most of the times the colors are correct. Otherwise I don't know if it is possible, because you're colorblind.

 

Related Topics