IXUS160/ELPH160 Porting attempt - page 17 - DryOS Development - CHDK Forum supplierdeeply
« previous next »
Pages: 1 ... 12 13 14 15 16 [17] 18 19 20 21 22 ... 50   Go Down

IXUS160/ELPH160 Porting attempt

  • 497 Replies
  • 234737 Views
*

Offline reyalp

  • ******
  • 14120
Re: IXUS160/ELPH160 Porting attempt
« Reply #160 on: 03 / August / 2015, 16:40:46 »
Advertisements
Quote from: srsa_4c on 03 / August / 2015, 15:32:21
To be honest, the code_gen'd code looks okay to me, so I'd rather think that
- one of the fw addresses we use is wrong and/or
- Canon has changed one of the fw functions we're relying on and/or
- we're overusing stack somewhere
...
The reason I asked about shooting mode above:
If you shoot DNG when you don't have a valid raw buffer (e.g. auto mode on new cams), a huge chunk of memory gets reversed. We know the same address range use for raw gets used for other stuff (like live view) when it's not used for raw.
Logged
Don't forget what the H stands for.
*

Offline nafraf

  • *****
  • 1308
Re: IXUS160/ELPH160 Porting attempt
« Reply #161 on: 03 / August / 2015, 22:35:31 »
Quote from: srsa_4c on 03 / August / 2015, 15:32:21
@nafraf
If you have time, can you check the power-up fix, and if it's working, commit it?
Committed to trunk r4202. Thanks
Logged
*

Offline nafraf

  • *****
  • 1308
Re: IXUS160/ELPH160 Porting attempt
« Reply #162 on: 05 / August / 2015, 23:11:35 »
Quote from: reyalp on 01 / August / 2015, 18:34:48
Someone should also check whether valid raw is captured in auto and low light modes, and define the appropriate CAM_DISABLE_RAW_IN_* defines if not.
Tested and included in r4205.
RAW works in AUTO but there are problems in low light mode.
« Last Edit: 17 / August / 2015, 21:17:24 by nafraf »
Logged
*

Offline RudeBoy

  • *
  • 6
Re: IXUS160/ELPH160 Porting attempt
« Reply #163 on: 07 / August / 2015, 05:40:11 »
HI，have the 160 port been added in the latest CHDK trunk？ 
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: IXUS160/ELPH160 Porting attempt
« Reply #164 on: 07 / August / 2015, 08:34:12 »
Quote from: RudeBoy on 07 / August / 2015, 05:40:11
HI，have the 160 port been added in the latest CHDK trunk？
CHDK source code is maintained on an svn site and is organized into a "development" and a "stable"  branch.

More details on that can be found here : CHDK Wiki : Release Strategy

The current code for the ixus160_elph160 is available in the "development" branch.  As you seem to be struggling with building your own version,  I've built the most recent code and attached it here.

HTH

EDIT : See the comment below from reyalp : "Should be noted that the previous builds were removed due the apparent destruction of two cameras.  As always, any use of CHDK is at your own risk." It was actually only one camera that ended up dead but it could easily have been two based on what was reported.  So  I've deleted the attachment from this post  If anyone wants to try this despite the warning, please feel free to PM me.
« Last Edit: 17 / August / 2015, 19:00:14 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline RudeBoy

  • *
  • 6
Re: IXUS160/ELPH160 Porting attempt
« Reply #165 on: 07 / August / 2015, 10:03:33 »
Quote from: waterwingz on 07 / August / 2015, 08:34:12
Quote from: RudeBoy on 07 / August / 2015, 05:40:11
HI，have the 160 port been added in the latest CHDK trunk？
CHDK source code is maintained on an svn site and is organized into a "development" and a "stable"  branch.

More details on that can be found here : CHDK Wiki : Release Strategy

The current code for the ixus160_elph160 is available in the "development" branch.  As you seem to be struggling with building your own version,  I've built the most recent code and attached it here.

HTH

@waterwingz

Thank you so much! I just need the latest CHDK build for IUXS160, because I couldnt find it in the newest trunk using CHDK SHELL. Sorry for bothring!
Logged
*

Offline hassan

  • *
  • 1
Re: IXUS160/ELPH160 Porting attempt
« Reply #166 on: 12 / August / 2015, 16:04:14 »
can any one tell me , when chdk software will be ready for public use?
Logged
*

Offline supergonkas

  • *
  • 1
Re: IXUS160/ELPH160 Porting attempt
« Reply #167 on: 17 / August / 2015, 14:58:00 »
Does this work on the IXUS 165 ?
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: IXUS160/ELPH160 Porting attempt
« Reply #168 on: 17 / August / 2015, 15:50:13 »
Quote from: supergonkas on 17 / August / 2015, 14:58:00
Does this work on the IXUS 165 ?
The Ixus 160 does not have optical IS, the 165 does. From my experience, that means their firmware is different, therefore the Ixus 165 needs a separate port.
Read the following FAQ entry: My camera isn't ported yet.
Logged
*

Offline reyalp

  • ******
  • 14120
Re: IXUS160/ELPH160 Porting attempt
« Reply #169 on: 17 / August / 2015, 16:30:05 »
Quote from: RudeBoy on 07 / August / 2015, 10:03:33
@waterwingz

Thank you so much! I just need the latest CHDK build for IUXS160, because I couldnt find it in the newest trunk using CHDK SHELL. Sorry for bothring!
Should be noted that the previous builds were removed due the apparent destruction of two cameras.

As always, any use of CHDK is at your own risk.

It's not clear if this is actually resolved. If it was due to the issues with the small partition getting filled, it is, but it's very hard to be sure without destroying more cameras.
Logged
Don't forget what the H stands for.
Pages: 1 ... 12 13 14 15 16 [17] 18 19 20 21 22 ... 50   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal