Looking for a Release for ELPH 115 IS - CHDK Releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

Looking for a Release for ELPH 115 IS

  • 6 Replies
  • 5292 Views
*

Offline Accupro

  • *
  • 25
    • AccuPro Inspection Services
Looking for a Release for ELPH 115 IS
« on: 27 / April / 2015, 18:57:36 »
Advertisements
This model is showing up as a model with a stable release but when I run STICK's it says there is no CHDK release for this camera, what am I missing?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Looking for a Release for ELPH 115 IS
« Reply #1 on: 27 / April / 2015, 19:19:21 »
Please post STICK's log file.  (sticklog.txt in the directory where you installed STICK).

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Accupro

  • *
  • 25
    • AccuPro Inspection Services
Re: Looking for a Release for ELPH 115 IS
« Reply #2 on: 27 / April / 2015, 19:40:25 »
Interesting:  So here is the STICK .txt file and its associated with my older A2300 and not the one I just tried i.e ELPH 115 IS.  Do I need to delete and restart STICK's or something?  I had to truncate the file as the .txt was too long.

STICK - Dave Mitchell 1.10A
OS Type=2 OS Version=0
engine link established
Is an admin
Running on a 32-bit machine
elevated=true
Native Interface established
maxsize=64000 testsize=70000 (64GB)

loading tables - please wait ...
Downloading build information from http://mighty-hoernsche.de/
Downloading build information from http://mighty-hoernsche.de/trunk/
Downloading build information from http://autobuild.akalab.de/release_full.txt
Downloading build information from http://autobuild.akalab.de/trunk_full.txt
tables loaded successfully

IMG_0006.JPG dropped
E:\DCIM\100___02\IMG_0006.JPG is being processed
actual fm=16777984 hex=1000300
fm=16777984 icm=3280000 fms='Firmware Version 1.00'
Checking official builds
Downloading http://zenoshrdlu.com/acid/acidchdk.properties
 - searching for build for Stable CHDK a2300-100c
 - build found - Stable CHDK bins/a2300-100c-1.3.0-4029-full.zip
Stable CHDK build is available for this camera
Processing completed
Scanning for cards - please wait ...
Scanning for suitable cards (64GB or less) ...  - please wait ...
Starting drive check
Checking drive D:
Checking drive E:
   drive E found
Checking drive F:
Checking drive G:
Checking drive H:
Checking drive I:
Checking drive J:
Checking drive K:
Checking drive L:
Checking drive M:
Checking drive N:
Checking drive O:
Checking drive P:
Checking drive Q:
Checking drive R:
Checking drive S:
Checking drive T:
Checking drive U:
Checking drive V:
Checking drive W:
Checking drive X:
Checking drive Y:
Checking drive Z:
Logged
*

Offline Accupro

  • *
  • 25
    • AccuPro Inspection Services
Re: Looking for a Release for ELPH 115 IS
« Reply #3 on: 27 / April / 2015, 19:44:41 »
OK sorry I went back into STICK's and retrieved this from the log:


STICK - Dave Mitchell 1.10A
OS Type=2 OS Version=0
engine link established
maxsize=64000 testsize=70000 (64GB)

Failed to load either asseng32 or asseng64 libraries

IMG_0001.JPG dropped
E:\DCIM\100___04\IMG_0001.JPG is being processed
actual fm=16777728 hex=1000200
fm=16777728 icm=3470000 fms='Firmware Version 1.00'
Checking official builds
Checking if pre-loaded zip C:\WINDOWS\system32\test100b.zip exists
zip C:\WINDOWS\system32\test100b.zip not found
 - no build found for Canon PowerShot ELPH 115 IS 100b
No official build is available for this camera
Processing completed


IMG_0001.JPG dropped
E:\DCIM\100___04\IMG_0001.JPG is being processed
actual fm=16777728 hex=1000200
fm=16777728 icm=3470000 fms='Firmware Version 1.00'
Checking official builds
Checking if pre-loaded zip C:\WINDOWS\system32\test100b.zip exists
zip C:\WINDOWS\system32\test100b.zip not found
 - no build found for Canon PowerShot ELPH 115 IS 100b
No official build is available for this camera
Processing completed

IMG_0001.JPG dropped
E:\DCIM\100___04\IMG_0001.JPG is being processed
actual fm=16777728 hex=1000200
fm=16777728 icm=3470000 fms='Firmware Version 1.00'
Checking official builds
Checking if pre-loaded zip C:\WINDOWS\system32\test100b.zip exists
zip C:\WINDOWS\system32\test100b.zip not found
 - no build found for Canon PowerShot ELPH 115 IS 100b
No official build is available for this camera
Processing completed

IMG_0001.JPG dropped
E:\DCIM\100___04\IMG_0001.JPG is being processed
actual fm=16777728 hex=1000200
fm=16777728 icm=3470000 fms='Firmware Version 1.00'
Checking official builds
Checking if pre-loaded zip C:\WINDOWS\system32\test100b.zip exists
zip C:\WINDOWS\system32\test100b.zip not found
 - no build found for Canon PowerShot ELPH 115 IS 100b
No official build is available for this camera
Processing completed
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Looking for a Release for ELPH 115 IS
« Reply #4 on: 27 / April / 2015, 20:03:17 »
Quote from: Accupro on 27 / April / 2015, 19:44:41
- no build found for Canon PowerShot ELPH 115 IS 100b
No official build is available for this camera
Processing completed
Curious.  The official build is actually for the IXUS132_ELPH115 rather than just an ELPH115.  I don't know if that matters or not.

For now,  you can manually download the install file ( ixus132_elph115-100b-1.3.0-4152-full_ALPHA.zip ) from the autobuild,  rename it to test100b.zip and put it into your  C:\WINDOWS\system32 directory (where you seem to be running STICK from ?)

 We will probably have to wait for zeno to swing by and take a look.  I'll ping him.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline zeno

  • *****
  • 891
Re: Looking for a Release for ELPH 115 IS
« Reply #5 on: 28 / April / 2015, 04:08:04 »
Hi Accupro. I think WaterWingz and I have seen this problem before (different camera though). At the start of the log it says:
   "Failed to load either asseng32 or asseng64 libraries"
One of these libraries has to be linked so that STICK can read and write the boot sector of the SD card. The reason STICK couldn't find them (they are Windows dlls that are part of the STICK package) is probably because you didn't install STICK properly - perhaps you are trying to execute STICK while it is still in the zip file. You need to unzip the zip (i.e. "extract" all the files) before running STICK.

If you are running Windows 7 or *8you will need to start STICK by double-clicking the stickx.cmd file
Logged
A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit
*

Offline Accupro

  • *
  • 25
    • AccuPro Inspection Services
Re: Looking for a Release for ELPH 115 IS
« Reply #6 on: 28 / April / 2015, 10:59:38 »
That was it, thanks for sorting that out for me!!
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal