S110 maximum voltage - page 2 - Hotwire! Hardware Mods, Accessories and Insights - CHDK Forum

S110 maximum voltage

  • 10 Replies
  • 3073 Views
Re: S110 maximum voltage
« Reply #10 on: 26 / May / 2015, 02:16:39 »
Advertisements
Hi,

I did an overnight test now. I set the voltage to 5.6V and run the S110 for more than 10 hours!
I measured the tempertature frequently with a thermometer gun on the hottest point I could find. This is on the front side where the lens is, below the Canon logo. If I zoom in and out very often the temperature goes up to 36°C the current then is 600mA. If not zooming, but LCD screen is on then the cam has a temperature of 30°C current is 350mA. If the LCD is off the camera has a temperature of 28°C and current is 110mA.
This morning the camera had a temperature of 28°C and still a current of 110mA.
The cam is still alive and works like a charm...



2 x IXUS 860IS 100c
2 x Powershot S110 103a

 

Related Topics