edit:I've checked this in. The partial propset file is propset_x.h in the platform directory. There are only a few changes form propset 6, but some of them are at low numbers. This *probably* means all the following values are shifted around, so anyone who wants to continue this port needs to go through, verify as many as possible, and clearly identify any that remain unknown.
Patch for modemap.CHDK is properly start and camera works seamlessly with SD cards up to 2GB. With a larger SD cards, there is an error after trying to save the data on the card. Without launched CHDK same card work without problems.
The camera seamlessly connects to the PTP clients and can be controlled.Chdkptp client in the menu to select the modes does not show anything, ptpCamGui shows only a few modes in the menu... All modes of the camera are available through = set_capture_mode_canon (xxxxx).Attached is the upgraded propset_x.h file marked with constants that I was able to check up.
This chdkptp module might be helpful https://chdk.setepontos.com/index.php?topic=12759.0With this, you can get a snapshot of all the propcases, then change a menu item (like jpeg resolution) and compare.
Started by gvandyk
Started by Jez
General Help and Assistance on using CHDK stable releases
Started by ProfHankD
« 1 2 »
Started by eaglesong
Started by duenyas
General Discussion and Assistance