IXUS 170 Porting - page 7 - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: 1 2 3 4 5 6 [7] 8 9   Go Down

IXUS 170 Porting

  • 87 Replies
  • 55136 Views
*

Offline momo

  • *
  • 18
Re: IXUS 170 Porting
« Reply #60 on: 06 / April / 2017, 22:20:55 »
Advertisements
Quote from: srsa_4c on 02 / April / 2017, 14:58:37
As a result, I would expect the camera to start in a certain mode (playback?) regardless of the button used to start it. Pressing and holding the ON/OFF button would likely result in the same start as pressing the playback button.

@momo: can you confirm this?
The camera starts in rec mode with the on/off button, and in playback mode with the playback button. Indeed always starts in playback, sorry for misreporting.
Logged
*

Offline momo

  • *
  • 18
Re: IXUS 170 Porting
« Reply #61 on: 07 / April / 2017, 11:48:58 »
Here is a slightly improved color matrix, and that’s it, I cannot do any better.
Code: [Select]
   0.99458  -0.21057  -0.12089
  -0.35437    1.1716   0.18276
 -0.022566   0.15516   0.45357
To evaluate this matrix, I made a CIE chromaticity diagram (attached). Black symbols are calibration data of the color target, red ones are calculated from a photograph of the target using the matrix above. Ideally, the red and black symbols should coincide, but that never happens. I think the correspondence is pretty good and even extends outside the sRGB color space (black triangle).
Logged
*

Offline momo

  • *
  • 18
Re: IXUS 170 Porting
« Reply #62 on: 22 / April / 2017, 06:53:30 »
Quote from: srsa_4c on 02 / April / 2017, 14:58:37
Thinking about it some more, I'm no longer sure that starting in rec mode is impossible, using the current code.
As always, you are right: it starts as it is intended to (short press – review, long press – rec).

Awfully sorry, guys, for the wrong reporting again! Another blunder of mine. Promise to better myself.
Logged
*

Offline momo

  • *
  • 18
Re: IXUS 170 Porting
« Reply #63 on: 22 / April / 2017, 09:33:51 »
As an aside, the camera recognizes CRW_*.CR2 as raw images, and they are also visible over PTP. Once a *.CR2 is recorded, the camera needs a restart to know it is there (as usual). Then, in REVIEW mode, it marks the image as, for example, “RAW+L” (if L is the image quality set in the Canon menu). Erasing the image, it presents a choice of “erase RAW/JPEG/RAW+JPEG”.

Incidentally, “show RAW saving time” doesn’t show anything, but I may have misunderstood what it was supposed to do.

As another aside, in manual flash mode (in the CHDK sense, as there’s no manual flash option in Canon menus), the flash power (or rather energy) presets are stored at 0xE7AA8 and default to 10, 45, 800 for min-mid-max power. So, setting flash to manual and min power and poking at 0xE7AA8 with an integer in the range of 1 to 800 or more will change the flash power from min (an almost invisible blink) to full.
Logged
*

Offline blackhole

  • *****
  • 946
  • A590IS 101b
    • Planetary astrophotography
Re: IXUS 170 Porting
« Reply #64 on: 22 / April / 2017, 10:02:59 »
Quote
As an aside, the camera recognizes CRW_*.CR2 as raw images, and they are also visible over PTP. Once a *.CR2 is recorded, the camera needs a restart to know it is there (as usual). Then, in REVIEW mode, it marks the image as, for example, “RAW+L” (if L is the image quality set in the Canon menu). Erasing the image, it presents a choice of “erase RAW/JPEG/RAW+JPEG”.
It seems to be normal for newer cameras, I see it on sx410.
Quote
Incidentally, “show RAW saving time” doesn’t show anything, but I may have misunderstood what it was supposed to do.
The display time in the console is too short, you can see it in the "Last console".
Miscellaneous Stuff->Console->Display last console
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: IXUS 170 Porting
« Reply #65 on: 23 / June / 2018, 15:39:43 »
This port is now in svn.

Test version attached for firmware 100a.

I'm not sure what has or has not been tested.
http://chdk.wikia.com/wiki/Testing
If someone (with the camera) feels this port is stable enough to be released officially, please post here.

edit:
outdated test build removed

ixus170_elph170-100a-1.5.0-5056-full.zip (794.64 kB - downloaded 3 times.)
« Last Edit: 14 / July / 2018, 12:00:16 by srsa_4c »
Logged
*

Offline reyalp

  • ******
  • 14128
Re: IXUS 170 Porting
« Reply #66 on: 08 / July / 2018, 17:01:21 »
FWIW, I'm pretty sure this camera has an ND, not iris.
It has task_Nd + NdActuator.c and not task_IrisEvent + IrisActuator.c
Logged
Don't forget what the H stands for.
*

Offline srsa_4c

  • ******
  • 4451
Re: IXUS 170 Porting
« Reply #67 on: 14 / July / 2018, 11:59:29 »
Quote from: reyalp on 08 / July / 2018, 17:01:21
FWIW, I'm pretty sure this camera has an ND, not iris.
It has task_Nd + NdActuator.c and not task_IrisEvent + IrisActuator.c
Corrected in changeset 5075.

I changed the alternative ALT button from VIDEO to HELP, so that it doesn't clash with the raw shortcut function.

New test build attached.
Logged
*

Offline Caefix

  • *****
  • 948
  • Sorry, busy deleting test shots...
Re: IXUS 170 Porting
« Reply #68 on: 07 / April / 2021, 14:46:39 »
 :-* Zebra, USB-Remote & latest ptp-patch2  improvement (~#5811) all right, maybe tiny issues in ndtest / ptp-camtest left?

Added  a 640*480 testshot, size on SD=94kb.  :blink:
It´s CRW_2637.DNG has 128*96*24, on SD=30137kb.
« Last Edit: 07 / April / 2021, 15:25:49 by Caefix »
Logged
All lifetime is a loan from eternity.
*

Offline srsa_4c

  • ******
  • 4451
Re: IXUS 170 Porting
« Reply #69 on: 07 / April / 2021, 17:43:32 »
Quote from: Caefix on 07 / April / 2021, 14:46:39
It´s CRW_2637.DNG has 128*96*24, on SD=30137kb.
If that surprises you, try a DNG from one of your other cameras. 128*96 is the size of the embedded thumbnail. Some software (Irfanview for example) will show the thumbnail when set to show the embedded preview.
Logged
Pages: 1 2 3 4 5 6 [7] 8 9   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal