SX60HS Porting - page 92 - DryOS Development - CHDK Forum supplierdeeply

SX60HS Porting

  • 915 Replies
  • 214532 Views
Re: SX60HS Porting
« Reply #910 on: 07 / May / 2019, 15:03:30 »
Advertisements
Well I got it loading now, but only in playback mode and the camera needed a really long time to boot up. When I press half shutter there i get an error "unknown propset 8". In Shooting mode CHDK is not loaded and I can't take any pictures.

And Firmware dump is done: https://drive.google.com/open?id=1bmYkPihooHDCQ4Dv8KDGI0DOL0Znvrkl

*

Offline srsa_4c

  • ******
  • 4031
Re: SX60HS Porting
« Reply #911 on: 07 / May / 2019, 15:29:42 »
Well I got it loading now, but only in playback mode and the camera needed a really long time to boot up. When I press half shutter there i get an error "unknown propset 8". In Shooting mode CHDK is not loaded and I can't take any pictures.
I can't really work out what might be happening.
"unknown propset 8" probably comes from a script and might indicate that old CHDK files are on that card.

Try re-formatting the card, make it bootable and extract a complete build from http://mighty-hoernsche.de/trunk/ .

The main part of the ROM matches the 100h dump we have. I found a romlog in it that does not seem CHDK related. The log part seems a bit unusual (may have happened while the cam was in a Canon service):
Code: [Select]
00010870: MoveFocusDistance
00010880: StopISDrive
00010890: InitializeAdjustmentFunction
00011060: GetZoomTelePoint
00011070: MoveFocusToTerminate
00011140: MoveZoomPoint
00053450: MoveFocusToTerminate
00053450: MoveFocusToTerminate
00053450: ResetZoomToTerminatePoint
00055590: M:ZM_RST
00055870: InitializeAdjustmentFunction
00055870: SetWindowSystemDrawSetting
00055880: GetYear
00055880: Driver.Create
00055890: GetSDDetect
00055890: Driver.Create
00055890: GetSDDetect
00055890: Driver.Create
00055900: GetSDDetect
00055900: GetModeDialState
00055910: GetVBatVoltage
00056100: UI:Button:0x0000112B:
00056140: DeviceUniqueIDCheckSum
00056150: System.Create
00056150: RomCheckSum
00056150: RomCheckSum
00056690: RomCheckSum
00056870: RomCheckSum
00056880: RomCheckSum
00056880: RomCheckSum
00056890: System.Create
00056900: RomCheckSum
00056900: RomCheckSum
00057270: SetFactorySerialNumber
00057270: LoadFactoryNumber
00057280: LoadSerialNumber
00057290: ClearDUIDFixFlag
00057380: WRITEADJUSTMENTDATATOFROM
00057550: UI_RegistDebugEventProc
00057570: ExecuteResetFactory
00057580: UI:VTMLock
00057580: UI:VTMUnLock
00057580: UI:DSIC:a8,0
00057580: UI:DSIC:11b,0
00057600: ExecuteShutDownPropertyService
00057790: LoadFactoryNumber
00057790: LoadSerialNumber
00057800: RefreshAdjustmentTableMirror
00057800: IsDUIDFixFlag
00057870: MoveLensToTerminatePoint
00057870: M:TERM_S
00057870: M:ZM_RST_S
00058560: M:ZM_RST_E
00058560: M:ZM_TRM_S
00058660: M:ZM_TRM_E
00058660: M:IR_TRM_S
00058670: M:IR_TRM_E
00058800: M:IS_PWS_S
00058800: M:IS_PWS_E
00058800: M:TERM_E
00060080: UI:Button:0x000010B4:DisconnectUSBCable
00060080: UI:USBDisconnect
00060080: PTPRspnd.ShutDownPTPFrameworkClient
00060090: UI:LogicalEvent:0x00001182:adr:0,Para:0
00060090: UI:AC:ShtPC
00060090: UI:TurnOnDisplay
00060310: UI:DispSwCon_DisableMute
00060310: UI:DispSw: Start
00060310: UI:DSIC:e2,0
00060310: UI:SetDisplayType
00060310: UI:VTMLock
00060310: UI:DispSw: After
00060310: UI:VTMUnLock
00060320: UI:DispSwCon_TurnOnBackLight
00060320: UI:TurnOnBackLight
00060320: UI:Window MuteOff
00060320: UI:MuteOffPhysicalScreen
00060320: UI:DispSw: Done
00060320: UI:TurnOffBackLight
00060320: UI:TurnOnBackLight
00060320: UI:AC:InitPB
00060320: UI:DCIC:0,16388
00060320: UI:_BeforeCBRForPlay
00060320: UI:_AfterCBRForPlay
00060320: UI:ExtMicCon::ExtMicCon_NotifyRecMode
00060320: SS:ToPlay
00060320: UI:AC:StartPB[2]
00060320: UI:DispSwCon_TurnOnDisplayDevice
00060320: UI:PB.Start
00060320: UI:VTMLock
00060320: UI:PB.Create
If you can't get the large cards to work, try something small (up to 16GB).

BTW, does the cam work without issues if CHDK is not loaded?

Re: SX60HS Porting
« Reply #912 on: 07 / May / 2019, 15:52:29 »
Well before i started anew i complete wiped the card. So there can't be any old files left on it. I did a clean start. And as far as I know the camera hadn't been to canon service yet, unless i was given a refurbished one instead of a new one.

And yes without chdk it works without any problems

*

Offline srsa_4c

  • ******
  • 4031
Re: SX60HS Porting
« Reply #913 on: 07 / May / 2019, 16:10:47 »
Well before i started anew i complete wiped the card. So there can't be any old files left on it.
The default script (which has not been updated for a while) can show a similar error: 'unsupported propset'. That might mean CHDK got into ALT mode somehow and you started the default script when you pressed the shutter (the default ALT button is the Playback button). Try making sure that you're not in ALT mode when you half press to switch to shooting mode.


Re: SX60HS Porting
« Reply #914 on: 07 / May / 2019, 21:08:52 »
Is that different from other cameras? With my sx500 chdk was loaded when I started it in normal shooting mode. Do I have to start the sx60 always in playback mode and then switch over to shooting mode?

*

Online reyalp

  • ******
  • 12156
Re: SX60HS Porting
« Reply #915 on: 08 / May / 2019, 01:22:11 »
Is that different from other cameras? With my sx500 chdk was loaded when I started it in normal shooting mode. Do I have to start the sx60 always in playback mode and then switch over to shooting mode?
It should start in shooting mode if you hold the power button down a bit longer. This is normal for CHDK.

If SX500 starts in shooting mode from a short click on the power button it, it's probably bug.
Don't forget what the H stands for.

 

Related Topics