EOS M3 porting - page 33 - DryOS Development - CHDK Forum  
« previous next »
Pages: 1 ... 28 29 30 31 32 [33] 34 35 36 37 38 ... 75   Go Down

EOS M3 porting

  • 746 Replies
  • 421050 Views
*

Offline c_joerg

  • *****
  • 1251
Re: EOS M3 porting
« Reply #320 on: 14 / April / 2017, 15:42:03 »
Advertisements
Quote from: srsa_4c on 14 / April / 2017, 14:35:13
I'm not familiar with that script, so I can only give a generic answer.
If you shoot right after focus/exposure has settled, the overrides may work. The longer you wait after half pressing, the more likely that the firmware overrides the CHDK override. The issue happens when
- focusing is set to manual
- auto focus doesn't find focus
- "there's no lens", meaning any manual lens that doesn't communicate with the body

I try to find out, what rawopint is doing on MF.

But, rawopint doesn’t work at all with m3-101a-1.5.0-4781. The exposure did not changes
I got the error in log file
Code: [Select]
sv 411 != cam 480
I had this problem in the past (Reply #259 ) and I thougt is was fixed in platform_camera.h?
With Ant’s version m3-101a-1.5.0-35 rawopint works fine.

Update:
Also the black_level is wrong in m3-101a-1.5.0-4781
m3-101a-1.5.0-4781 => black_level=511
m3-101a-1.5.0-35    => black_level=2047

« Last Edit: 14 / April / 2017, 16:06:14 by c_joerg »
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #321 on: 14 / April / 2017, 17:30:18 »
Quote from: c_joerg on 14 / April / 2017, 15:42:03

But, rawopint doesn’t work at all with m3-101a-1.5.0-4781. The exposure did not changes
I got the error in log file
Code: [Select]
sv 411 != cam 480
I had this problem in the past (Reply #259 ) and I thougt is was fixed in platform_camera.h?
With Ant’s version m3-101a-1.5.0-35 rawopint works fine.
There was no commits for M3 in main repository this year...
Logged
*

Offline reyalp

  • ******
  • 14118
Re: EOS M3 porting
« Reply #322 on: 14 / April / 2017, 17:33:06 »
Quote from: c_joerg on 14 / April / 2017, 15:42:03
I had this problem in the past (Reply #259 ) and I thougt is was fixed in platform_camera.h?
With Ant’s version m3-101a-1.5.0-35 rawopint works fine.
The last real update to the M3 platform in the official CHDK source was on Dec 4. AFAIK, no patches for this port have been submitted since.

Edit:
Quote from: Ant on 14 / April / 2017, 17:30:18
There was no commits for M3 in main repository this year...
We only make changes if the person doing the port posts a patch.
« Last Edit: 14 / April / 2017, 17:36:08 by reyalp »
Logged
Don't forget what the H stands for.
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #323 on: 14 / April / 2017, 17:40:05 »
Maybe I'll try to generate patches for M3 this weekend.
Logged
*

Offline reyalp

  • ******
  • 14118
Re: EOS M3 porting
« Reply #324 on: 15 / April / 2017, 19:28:28 »
Here's a patch for I think is simple_movie_status. It should be 1 while recording or finishing video, zero otherwise.


Logged
Don't forget what the H stands for.
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #325 on: 16 / April / 2017, 02:02:50 »
Quote from: reyalp on 15 / April / 2017, 19:28:28
It should be 1 while recording or finishing video, zero otherwise.
Checked - it works. Can be added to main repository.
Logged
*

Offline reyalp

  • ******
  • 14118
Re: EOS M3 porting
« Reply #326 on: 16 / April / 2017, 03:41:11 »
Quote from: Ant on 16 / April / 2017, 02:02:50
Checked - it works. Can be added to main repository.
Thanks. Done in 4794
Logged
Don't forget what the H stands for.
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #327 on: 16 / April / 2017, 09:47:36 »
Build 4794 for EOS M3 v1.0.1 can be found in attachment
Logged
*

Offline c_joerg

  • *****
  • 1251
Re: EOS M3 porting
« Reply #328 on: 16 / April / 2017, 13:30:17 »
Quote from: Ant on 16 / April / 2017, 09:47:36
Build 4794 for EOS M3 v1.0.1 can be found in attachment
Thanks for update. No Errors in rawopint and black level is OK.
Quote from: srsa_4c on 14 / April / 2017, 14:35:13
I'm not familiar with that script, so I can only give a generic answer.
The issue happens when
- focusing is set to manual
- auto focus doesn't find focus
- "there's no lens", meaning any manual lens that doesn't communicate with the body

I made just 3 short runs with rawopint (around 3*14 pictures)
1) Fast Mode, Auto Focus
2) Fast Mode, Manual Focus
3) Continuous Mode, Manual Focus
I have the camera held on a bright spot (for two shots). Then I kept the camera in a shadow. The exposure follows as I expected. So, there is no different between Auto and MF.
Quote from: srsa_4c on 14 / April / 2017, 14:35:13
If you shoot right after focus/exposure has settled, the overrides may work. The longer you wait after half pressing, the more likely that the firmware overrides the CHDK override.
I'm not sure how the timing in the script is. Maybe override takes place shortly before the shoot.

Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline aparis1983

  • *
  • 11
Re: EOS M3 porting
« Reply #329 on: 21 / April / 2017, 13:48:24 »
Hi,
Disclaimer: fairly new to this. I was wondering when there would be an "official" CHDK zip file download available in http://chdk.wikia.com/wiki/M3 ?
I see there are already some available in this porting thread but was just curious when it would become available within M3's CHDK section.
Two years ago I used an SD880 IS running an intervalometer script for aerial photography on a high altitude balloon. Here are some shots from that flight at 115,000 feet: https://m.imgur.com/a/FxoIM
In about two months I'll be launching another high altitude balloon for a STEM program I'm coordinating for a local children's science museum. This time I've upgraded to an M3 after reading that it can run CHDK.
I'm good at following directions with videos and how to articles, but the how-to on the M3 is littered throughout this thread leaving me a little confused.
This weekend I'll be checking my firmware version and proceeding from there. Can someone guide me to the latest CHDK download that successfully runs on the M3?
Is the latest one under reply #230 of this thread?
Any help is greatly appreciated?
 
Logged
Pages: 1 ... 28 29 30 31 32 [33] 34 35 36 37 38 ... 75   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal