EOS M3 porting - page 65 - DryOS Development - CHDK Forum supplierdeeply

EOS M3 porting

  • 663 Replies
  • 233375 Views
Re: EOS M3 porting
« Reply #640 on: 19 / April / 2020, 12:06:25 »
Advertisements
it doesn't work
it says card is locked

Re: EOS M3 porting
« Reply #641 on: 19 / April / 2020, 12:07:47 »
i even checked a mac equivalent of eoscard called macboot, did the process but nothinf happens...

*

Offline srsa_4c

  • ******
  • 4228
Re: EOS M3 porting
« Reply #642 on: 19 / April / 2020, 12:10:20 »
it doesn't work
it says card is locked
Okay, that's clear at least.
How large is the card? It needs to be 32GB or less, otherwise it's more complicated to set up.

Re: EOS M3 porting
« Reply #643 on: 19 / April / 2020, 12:11:06 »
yes 32


*

Offline srsa_4c

  • ******
  • 4228
Re: EOS M3 porting
« Reply #644 on: 19 / April / 2020, 12:22:17 »
yes 32
Well, something is still screwed at this point.
The filesystem on card needs to be FAT32. But it is FAT32 by default.
It's not clear whether the BOOTDISK signature is correctly written on the card (Does MacBoot confirm that it's on the card?).
If the filesystem and bootflag are ok, the only thing that's needed are the CHDK files, including DISKBOOT.BIN in card root.

I guess you could try low level formatting the card in camera then do the installation with STICK again...

Re: EOS M3 porting
« Reply #645 on: 19 / April / 2020, 12:24:17 »
hum... redid the thing with Macboot
this time i choosed the third option "make DSLR-Bootable "
i switch on the m3 and finaly got the chdk logo
hum... what's next ?

Re: EOS M3 porting
« Reply #646 on: 19 / April / 2020, 12:26:01 »
how can i check it is a clean install ?
And how do i access to the option i need ? (clean hdmi + no power shut off ?

Re: EOS M3 porting
« Reply #647 on: 19 / April / 2020, 12:27:38 »
in progress : follow the Astro tuto on you tube...


*

Offline srsa_4c

  • ******
  • 4228
Re: EOS M3 porting
« Reply #648 on: 19 / April / 2020, 12:28:55 »
hum... redid the thing with Macboot
this time i choosed the third option "make DSLR-Bootable "
i switch on the m3 and finaly got the chdk logo
hum... what's next ?
You can enter and exit the so-called ALT mode of CHDK by pressing the playback button momentarily. When in ALT mode, press MENU to enter the CHDK menu. Navigate with the directional buttons, use SET to execute the menu item that is highlighted. Find the 3 settings I mentioned at the start of our conversation and set them. And that's it.

Re: EOS M3 porting
« Reply #649 on: 19 / April / 2020, 12:53:31 »
yahoooooo !!!!!!!
It works !!!
thank yoooooouuuuu !
Now a really dumb question : the card is actually read only mode to install chdk
I just put the switch up to put in write mode and when i powered on again there is no chdk install.
What can i do if i want to use the camera to record and use Chdk ?

 

Related Topics