EOS M3 porting - page 21 - DryOS Development - CHDK Forum supplierdeeply
« previous next »
Pages: 1 ... 16 17 18 19 20 [21] 22 23 24 25 26 ... 75   Go Down

EOS M3 porting

  • 746 Replies
  • 392085 Views
*

Offline reyalp

  • ******
  • 14080
Re: EOS M3 porting
« Reply #200 on: 27 / November / 2016, 16:17:02 »
Advertisements
Quote from: Ant on 27 / November / 2016, 08:00:10
This need to be added for motion detection:
Thanks for catching that, added in r4738
Logged
Don't forget what the H stands for.
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #201 on: 27 / November / 2016, 16:18:17 »
Quote from: reyalp on 27 / November / 2016, 15:46:04
Is https://app.assembla.com/spaces/chdk-m3/subversion/source/23/trunk/modules/edgeoverlay.c the most recent version?
Yes. But you can also choose 62ndidiot's variant.


Quote
So spytask only starts if you hold this button while the camera is booting?
vice versa

Quote
Or do you mean only the romlog code depend on M-Fn ? In that case, what is *(int*)(0x9e5c) & 0x00600000 around spytask?
IIRC there are two types of firmware startup: when battery cover closed after battery insertion and when power button is pressed.



Quote
What values does get_vbatt in Lua return, actual voltage (like 7200) or some other value?
I didn't try it. But CHDK OSD displays values between 6800-8400mV

Quote
Does it actually use different speeds for zoom in / zoom out? From the manual, it looks like the zoom controls are on the lens, not the body. Can CHDK even detect or send zoom controls on this camera? If not, it should not have zoom keys at all (It's possible we could synthesize them later using other functions or levents)
I don't know anything about zoom speeds. Most EF lenses don't have electromechanical zoom drive(excepting this). But two buttons above jogdial used in playback mode for zooming. Right button also used in viewfinder mode for x1/x5/x10 magnifying.
« Last Edit: 27 / November / 2016, 16:47:56 by Ant »
Logged
*

Offline reyalp

  • ******
  • 14080
Re: EOS M3 porting
« Reply #202 on: 27 / November / 2016, 16:49:45 »
Quote from: Ant on 27 / November / 2016, 16:18:17
I don't know anything about zoom speeds. Most EF lenses don't have electromechanical zoom drive. But two buttons above jogdial used in playback mode for zooming. Right button also used in viewfinder mode for x1/x5/x10 magnifying.
Thanks. I'm not sure these should be defined as zoom keys at all (rather than AE lock / AF adjust) , but for now I've updated the comments. If they weren't defined as zoom, we'd have to do something with the menu scale factor adjustment.

Is the INFO button (lower left) assigned to display in CHDK?
Logged
Don't forget what the H stands for.
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #203 on: 27 / November / 2016, 16:59:50 »
Quote from: reyalp on 27 / November / 2016, 16:49:45
Is the INFO button (lower left) assigned to display in CHDK?
Yes.
Logged
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #204 on: 30 / November / 2016, 14:44:19 »
some comments were updated in stubs_min.S:
Code: [Select]
Index: /platform/m3/sub/101a/stubs_min.S
===================================================================
--- /platform/m3/sub/101a/stubs_min.S (revision 4740)
+++ /platform/m3/sub/101a/stubs_min.S (working copy)
@@ -1,40 +1,40 @@
 #include "stubs_asm.h"
 
 //DEF(led_table,)
-DEF(jpeg_count_str,                0x0016CC64) //@ Found @0xfc0fc46c
+DEF(jpeg_count_str,                0x0016CC64) //@ Found @0xFC1A0A2C
 DEF(file_counter_var,              0x00012460) //@ found by searching for "FileBackupProperty.c"
 DEF(ctypes, 0xFC5E29F4) //@ me
 
 // Camera has 2 RAW buffers @ 0x44000000 & 0x4adb54a0
-//DEF(raw_buffers                   ,0xFC607634) //@ FC6CB874 FC607634 ??? Found @0xfc16d43e
+//DEF(raw_buffers                   ,0xFC607634) //@ FC6CB874 ??? Found @0xFC158B60
 DEF(raw_buffers_canon_raw                   ,0xFC6CB874) //@ FC607634
 DEF(raw_buffers_jpeg                         ,0xFC6CB874) //@
-DEF(active_raw_buffer             ,0x0000B3B4) //@ ??? Found @0xfc13fa6c, 0xffffffff when uninited...
+DEF(active_raw_buffer             ,0x0000B3B4) //@ ??? , 0xffffffff when uninited...
 DEF(fileio_semaphore              ,0x000125AC) //@ Found @0xFC06E186
 
-DEF(physw_status                            ,0x00052098) //@ Found @0xfc0604ae
-DEF(physw_run                               ,0x000082CC) //@ Found @0xfc0601f6
-DEF(physw_sleep_delay                       ,0x000082D4) //@ Found @0xfc0601f6
+DEF(physw_status                            ,0x00052098) //@ Found @0xFC083E76
+DEF(physw_run                               ,0x000082CC) //@ Found @0xFC083BC6
+DEF(physw_sleep_delay                       ,0x000082D4) //@ Found @0xFC083BC6
 
-//DEF(error_table                             ,0xFC63812C) //@ Found @0xfc1abf24
+//DEF(error_table                             ,0xFC63812C) //@ Found @0xFC18E1A0
 
-DEF(levent_table                            ,0xFC63846C) //@ Found @0xfc0a4b40
-DEF(FlashParamsTable                        ,0xFC747DB8) //@ 0xFC0E15C4-> 0xfc7313a0
+DEF(levent_table                            ,0xFC63846C) //@ Found @0xFC113158
+DEF(FlashParamsTable                        ,0xFC747DB8) //@ 0xFC0E15C4-> 0xFC746944
 DEF(movie_status                            ,0x00010b08) // or 0x10a88
 FAKEDEF(video_compression_rate, 1)
 DEF(full_screen_refresh                     ,0x00012a94) // Found @0xfc2b0f5c
-DEF(canon_menu_active                       ,0x0000C18C) //@ Found @0xfc27d0bc
+DEF(canon_menu_active                       ,0x0000C18C) //@ Found @0xFC32DD9C
 FAKEDEF(canon_shoot_menu_active, 1) // ??? not found
-DEF(playrec_mode                            ,0x0000B454) //@ Found @0xfc27937e
+DEF(playrec_mode                            ,0x0000B454) //@ Found @0xFC325CA4
 FAKEDEF(zoom_status                             ,1) // Found @0xfc30e61c
 //DEF(zoom_status                             ,0x00018b04) // Found @0xfc30e61c
 // focus_len_table contains zoom focus lengths for use in 'get_focal_length' (main.c).
 // each entry contains 2 int value(s), the first is the zoom focus length.
 // there are 102 entries in the table - set NUM_FL to 101
-DEF(focus_len_table                         ,0xfdf6ad20)
+//DEF(focus_len_table                         ,0xfdf6ad20)
 //DEF(zoom_busy                               ,0x00010814) // Found @0xfc1a0998
 //DEF(focus_busy                              ,0x00010694) // Found @0xfc28b964
-DEF(recreview_hold                          ,0x000097B8) //@ Found @FC34B82A      0xfc2a2c22
+DEF(recreview_hold                          ,0x000097B8) //@ Found @FC34B83A
 FAKEDEF(zoom_busy                               ,1)
 FAKEDEF(focus_busy                              ,1)
 // sx280 c&p?
@@ -48,7 +48,7 @@
 DEF(active_bitmap_buffer, 0xC14C) //@ xac10) // or 0xac14? just a guess
 // FAKEDEF(viewport_buffers, 1) // ?
 // FAKEDEF(active_viewport_buffer, 1) // ?
-DEF(current_viewport_buffer       ,0x0000889C) //8878????????????????????????????????
+DEF(current_viewport_buffer       ,0x0000889C) //8878?  Found @FC133DE2
 DEF(viewport_buffers              ,0xFC5F8DE8) // from memory search, refs to FC5F8DD8
 
 DEF(jog_position,                           0xdb48) // 0xdb34 +0x14, +0x18
@@ -57,4 +57,4 @@
 
 //FAKEDEF(enabled_refresh_physical_screen,    1)
 
-DEF(displaytype,                            0x9974) //@ 0x8ea4 + 0x14, found  @ fc135f2a (GetDisplayType)
+DEF(displaytype,                            0x9974) //@ 0x9934 + 0x40, found  @ 0xFC35DD56 (GetDisplayType)

and in /loader/m3 directory:
Code: [Select]
Index: entry.S
===================================================================
--- entry.S (revision 4740)
+++ entry.S (working copy)
@@ -4,5 +4,6 @@
 .code 16
 .align 2
 .syntax unified
+    LDR     SP, =MEMBASEADDR
     B       my_restart
     .ascii  "gaonisoy"
Index: main.c
===================================================================
--- main.c (revision 4740)
+++ main.c (working copy)
@@ -16,26 +16,10 @@
 
     core_copy(src, dst, length);
 
-    asm volatile ( // fc095c80 102b/102c
-/*    "movs    r0, #0x78\n"
-    "mcr     p15, 0, r0, c1, c0\n"
-    "movs    r0, #0\n"
-    "mcr     p15, 0, r0, c7, c10, 4\n"
-    "mcr     p15, 0, r0, c7, c5\n"
-    "mcr     p15, 0, r0, c7, c6\n"
-    "movw    r0, #0x4006\n"
-    "mcr     p15, 0, r0, c9, c1\n"
-    "mcr     p15, 0, r0, c9, c1, 1\n"
-    "mrc     p15, 0, r0, c1, c0\n"
-    "orr.w   r0, r0, #0x50000\n"
-    "mcr     p15, 0, r0, c1, c0\n"
-    "movw    r1, #0x4ffc\n"
-    "ldr     r0, =0x12345678\n"
-    "str     r0, [r1, #0]\n"
-    //"ldr     r0, =0xfc020000\n"*/
+    asm volatile (
     "mov     r1, %1\n"
     "mov     r0, %0\n"
-    "ldr     r2, =0xfc1300b3\n" // address is OK for 102b and 102c   0xfc12dd3b
+    "ldr     r2, =0xfc1300b3\n" // address is OK for 101a
     "blx     r2\n"              // caching related routine called at fw startup
     "mov     r0, %0\n"
     "add     r0, r0, #1\n"
« Last Edit: 30 / November / 2016, 15:03:19 by Ant »
Logged
*

Offline reyalp

  • ******
  • 14080
Re: EOS M3 porting
« Reply #205 on: 30 / November / 2016, 23:08:54 »
Quote from: Ant on 30 / November / 2016, 14:44:19
some comments were updated in stubs_min.S:
Thanks, checked in trunk 4743. It might seem like a small thing but I really appreciate it.

lib.c hook_raw_image_addr was another I wasn't sure whether the comments were just copied, or actually verified for this cam. If they are verified, no need to change the comments.

If you can post more patches, posting them as attachments would be helpful.
Logged
Don't forget what the H stands for.
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #206 on: 01 / December / 2016, 00:43:46 »
Quote from: reyalp on 30 / November / 2016, 23:08:54
lib.c hook_raw_image_addr was another I wasn't sure whether the comments were just copied, or actually verified for this cam. If they are verified, no need to change the comments.
If you are talking about line 118, I will check it later. Now I can only say, that DNG shooting works normally in PATM modes and camera uses the same buffers for RAW and JPG.
P.S. RBF fonts are too small for new cameras. I was trying ML fonts, but there is a difference in special symbols.
« Last Edit: 01 / December / 2016, 00:48:25 by Ant »
Logged
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #207 on: 01 / December / 2016, 13:08:05 »
In Auto mode camera uses the same buffers: raw_buffers_jpeg[] = raw_buffers_canon_raw[] = raw_buffers[].

So hook_raw_image_addr function was simplified:
Code: [Select]
Index: lib.c
===================================================================
--- lib.c (revision 4743)
+++ lib.c (working copy)
@@ -106,24 +106,9 @@
 //    return raw_buffers[(active_raw_buffer&3)];
     // observed values 0-2, 3 would index something that doesn't look like a raw fb in the jpeg case
     int i=active_raw_buffer&3;
-/*    _LogCameraEvent(0x20,"lc: hria: %i %i %08x %i",i, camera_info.state.mode_shooting,
-                                              camera_info.state.mode_shooting,
-                                              shooting_get_prop(PROPCASE_IMAGE_FORMAT));
-*/
-    // if(i>2) {
-        // i=0;
-    // }
-    if( camera_info.state.mode_shooting == MODE_AUTO) {
-        // AUTO mode (canon raw can't be enabled in AUTO)
-        return (char *)0x435ee300; // TODO unclear if this is only buffer, or if used in all AUTO sub modes
-    }else if(shooting_get_prop(PROPCASE_IMAGE_FORMAT) == 1) {
-    // canon raw disabled - uses up to 3 raw buffers
-        return raw_buffers_jpeg[i];
-    } else {
-        // canon raw enabled - different address, not clear if it ever uses multiple buffers
-        return raw_buffers_canon_raw[i];
-    }
-    // TODO most scene modes seem to use different addresse(s)
+    if(i>2) i=0;
+    return raw_buffers[i];
+        // TODO most scene modes seem to use different addresse(s)
 }
 
 /* char *hook_alt_raw_image_addr()
Index: sub/101a/stubs_min.S
===================================================================
--- sub/101a/stubs_min.S (revision 4743)
+++ sub/101a/stubs_min.S (working copy)
@@ -5,10 +5,8 @@
 DEF(file_counter_var,              0x00012460) //@ found by searching for "FileBackupProperty.c"
 DEF(ctypes, 0xFC5E29F4) //@ me
 
-// Camera has 2 RAW buffers @ 0x44000000 & 0x4adb54a0
-//DEF(raw_buffers                   ,0xFC607634) //@ FC6CB874 ??? Found @0xFC158B60
-DEF(raw_buffers_canon_raw                   ,0xFC6CB874) //@ FC607634
-DEF(raw_buffers_jpeg                         ,0xFC6CB874) //@
+// Camera has 3 RAW buffers @ 0x4464F8C8, 0x46FB98A8, 0x49923888
+DEF(raw_buffers                   ,0xFC6CB874) // Found @0xFC4071F8 & 0xFC407080
 DEF(active_raw_buffer             ,0x0000B3B4) //@ ??? , 0xffffffff when uninited...
 DEF(fileio_semaphore              ,0x000125AC) //@ Found @0xFC06E186
 

But CHDKPTP gives me "ERROR: init failed" when I try to make DNG Remote Shoot in Auto mode.

And I didn't found raw data in memory dump which was made after shooting in Scene mode.
« Last Edit: 01 / December / 2016, 14:35:01 by Ant »
Logged
*

Offline reyalp

  • ******
  • 14080
Re: EOS M3 porting
« Reply #208 on: 01 / December / 2016, 22:44:49 »
Quote from: Ant on 01 / December / 2016, 13:08:05
In Auto mode camera uses the same buffers: raw_buffers_jpeg[] = raw_buffers_canon_raw[] = raw_buffers[].

So hook_raw_image_addr function was simplified:
Thanks. Checked in, trunk 4744.

On G7X, the raw buffer addresses varied depending on whether Canon raw was enabled. If you haven't, it would be good to check whether this is true on M3.

Most people will probably use Canon raw rather than CHDK, but having the raw buffers correct allows scripts to do stuff with the raw buffer. It may also allow capturing raw in some modes where Canon raw is not available.

Quote
But CHDKPTP gives me "ERROR: init failed" when I try to make DNG Remote Shoot in Auto mode.
in platform_camera.h, this port has

 #define CAM_DISABLE_RAW_IN_AUTO 1

which should disable all CHDK raw / dng in auto mode. If there is actually a valid raw buffer in auto, you can take that out. There's a comment that says something about quick press, but that might be copied from another cam.

I notice platform_camera.h also has

 #define CAM_HAS_ND_FILTER                   1

which I assume isn't true. Also

#define CAM_HAS_JOGDIAL                     0

which I mentioned earlier. It should either be #undef (if no jogdial, or the code is not implemented), or #define 1. From the manual, it looks like it has a jogdial and another control dial.
Logged
Don't forget what the H stands for.
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #209 on: 03 / December / 2016, 13:20:47 »
I found that in Hybrid Auto mode raw buffers have different addresses than in PATM and Auto modes. I don't know will CHDK be used in Hybrid Auto mode.

Added an experimental feature that could be helpfull for third party batteries.
It disables Battery Authentication Menu and enables Battery Icon.

build r31 for fw v1.0.1 can be found in attachment

EDIT:
removed because of position of forum administration  :)
« Last Edit: 05 / December / 2016, 03:01:23 by Ant »
Logged
Pages: 1 ... 16 17 18 19 20 [21] 22 23 24 25 26 ... 75   Go Up
« previous next »
 

Related Topics