EOS M3 porting - page 41 - DryOS Development - CHDK Forum

EOS M3 porting

  • 746 Replies
  • 437160 Views
*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #400 on: 10 / July / 2017, 17:47:05 »
Advertisements
Here's some "blind" cleanup and notes

At least it works after building DISKBOOT.BIN
Will you commit your patch?
I'm planning to add current_fb_d variable but it's better to do it step by step.
For features like this there need to make platform specific menu. Any suggestions how to do it?

« Last Edit: 10 / July / 2017, 17:56:59 by Ant »

*

Offline reyalp

  • ******
  • 14128
Re: EOS M3 porting
« Reply #401 on: 10 / July / 2017, 23:27:04 »
At least it works after building DISKBOOT.BIN
Thanks, checked in.
Quote
I'm planning to add current_fb_d variable but it's better to do it step by step.
For features like this there need to make platform specific menu. Any suggestions how to do it?
I'd put it under camera.h / platform_camera.h ifdefs, like the other conditional menu items. If you need a whole submenu (rather than just some items) CAM_TOUCHSCREEN_UI is an example of one that does that. Any the M3 needs are potentially applicable to M10 as well, at least.
Don't forget what the H stands for.

*

Offline reyalp

  • ******
  • 14128
Re: EOS M3 porting
« Reply #402 on: 12 / July / 2017, 00:28:52 »
I undef'd the CAN_SD_OVER_IN options, updated the notes as far as I understand the status of the port, disabled FI2 building, and enabled in the autobuild.
It's currently labeled PREALPHA, hopefully this doesn't break anything.
Don't forget what the H stands for.

*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #403 on: 12 / July / 2017, 13:45:45 »
It's currently labeled PREALPHA, hopefully this doesn't break anything.

Binary from autobuild for fw 101a works at all:


There need a tester with fw 120f  because I don't want to reflash my camera to 120f every time.

Please give for it the correct name: M3 & M10 aren't PowerShots. They are EOS.
« Last Edit: 12 / July / 2017, 13:54:16 by Ant »

*

Offline reyalp

  • ******
  • 14128
Re: EOS M3 porting
« Reply #404 on: 12 / July / 2017, 16:05:14 »
Please give for it the correct name: M3 & M10 aren't PowerShots. They are EOS.
I noticed this, but those labels actually come from some hairy TCL code in the mighty-hoernsche autobuild rather than the CHDK source, so I'm not in a hurry to fix it ;)

I did consider calling the platform eosm... rather than m...
Don't forget what the H stands for.

Re: EOS M3 porting
« Reply #405 on: 13 / July / 2017, 04:16:09 »
There need a tester with fw 120f  because I don't want to reflash my camera to 120f every time.
I have two "Good" EOS M3-100d and one "Faulty (Power-On)" EOS M3-101a.
The EOS M3-100d are now (i.e. today) booting Ok but not much more.
Also I have been following the progress of EOS M3-120f port.
And so I might have discovered some porting typos and/or errors for the 101a and 120f.

Is there any point of having a EOS M3-100d port when a better option is just to upgrade to the 101a and 120f.

Should I:-

a/ Don't up grade any of the EOS M3's, yet.
b/ Upgrade a "Good" EOS M3-100d to a "Good" EOS M3-120f.
c/  Just upgrade the "Faulty" EOS M3-101a to "Faulty (Power-On)"  EOS M3-120f.

H-H
Lenses, 2x Canon 22mm STM, 1x Sigma 4.5mm fisheye, 1x Canon Ef Fisheye.
Just got a Buspirate for testing Canon Ef-Comms.
« Last Edit: 13 / July / 2017, 04:20:16 by Hardware_Hacker »

*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #406 on: 13 / July / 2017, 10:39:03 »
Is there any point of having a EOS M3-100d port when a better option is just to upgrade to the 101a and 120f.

Should I:-

a/ Don't up grade any of the EOS M3's, yet.
b/ Upgrade a "Good" EOS M3-100d to a "Good" EOS M3-120f.
c/  Just upgrade the "Faulty" EOS M3-101a to "Faulty (Power-On)"  EOS M3-120f.

I have no reason to make 100d port. So my suggestion is "b/".

*

Offline reyalp

  • ******
  • 14128
Re: EOS M3 porting
« Reply #407 on: 13 / July / 2017, 13:24:51 »
I have no reason to make 100d port. So my suggestion is "b/".
I agree with that. In the past CHDK practice has been to not make new ports for earlier versions after a Canon firmware update becomes available.
Don't forget what the H stands for.

*

Offline c_joerg

  • *****
  • 1251
Re: EOS M3 porting
« Reply #408 on: 16 / July / 2017, 08:33:56 »
disabled FI2 building
Is this a great thing to make it work?

M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd

*

Offline Ant

  • *****
  • 509
Re: EOS M3 porting
« Reply #409 on: 16 / July / 2017, 10:19:07 »
I was trying few times - no success. Camera crashes during restart. Don't see any reasons to spend my time trying again.
Maybe disassembling of flasher from official fi2 file will be helpfull...
« Last Edit: 16 / July / 2017, 10:33:41 by Ant »

 

Related Topics


SimplePortal © 2008-2014, SimplePortal