Green pixels Canon D20 - page 3 - General Help and Assistance on using CHDK stable releases - CHDK Forum

Green pixels Canon D20

  • 24 Replies
  • 11526 Views
Re: Green pixels Canon D20
« Reply #20 on: 07 / September / 2015, 16:28:48 »
Advertisements
Oh, I see. Is it possible to increase the free RAM? I have a 16GB SDHC card.
There are several memory model option that a CHDK developer can select.  But this is not something an end user can access - it's decide when the port is compiled.   And typically the developer will pick the memory model that makes the most free RAM available for CHDK use.

Quote
I have a 16GB SDHC card.
Your SD card is "external storage".  Too slow to be used for program execution.
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline reyalp

  • ******
  • 14117
Re: Green pixels Canon D20
« Reply #21 on: 07 / September / 2015, 16:37:07 »
Is this enough free RAM for keeping track of 28 800 bad pixels?
As waterwingz says, it's on the low side. You could be OK just shooting DNG, but you might run into problems running scripts or using other features that need more RAM. Generally, if the camera runs out of free RAM, it will crash, so if you aren't experiencing crashes, it's probably OK for the things you are doing.

Attached is a test build that enables another RAM area. Please check that it loads and runs OK.
Don't forget what the H stands for.

Re: Green pixels Canon D20
« Reply #22 on: 07 / September / 2015, 16:55:04 »
Thanks waterwingz and reyalp. I'll try the test build asap  :)

Re: Green pixels Canon D20
« Reply #23 on: 08 / September / 2015, 10:32:45 »
Attached is a test build that enables another RAM area. Please check that it loads and runs OK.

The 4228 test build seem to run fine and free RAM did increase! :) (previously 398800 bytes)


*

Offline reyalp

  • ******
  • 14117
Re: Green pixels Canon D20
« Reply #24 on: 08 / September / 2015, 22:42:01 »
The 4228 test build seem to run fine and free RAM did increase! :) (previously 398800 bytes)
Thanks for checking. I've enabled that in the autobuilds. It's still a bit low, but if you aren't running into crashes it's probably OK.
Don't forget what the H stands for.

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal