G5X Porting. - page 5 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 2 3 4 [5] 6 7 8 9 10   Go Down

G5X Porting.

  • 93 Replies
  • 41447 Views
*

Offline 000gui

  • *
  • 8
Re: G5X Porting.
« Reply #40 on: 16 / August / 2019, 16:53:22 »
Advertisements
I have made a little video. Let me know if you want to see something else.
https://drive.google.com/file/d/1-Fe0keWfyBfTUxOWd4maRQYyjjM4uZ3p/view?usp=drivesdk
Logged
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: G5X Porting.
« Reply #41 on: 16 / August / 2019, 20:50:18 »
Quote from: 000gui on 16 / August / 2019, 16:53:22
I have made a little video. Let me know if you want to see something else.
https://drive.google.com/file/d/1-Fe0keWfyBfTUxOWd4maRQYyjjM4uZ3p/view?usp=drivesdk


Thanks for posting the video, that helps.


Can you check the Canon settings in the SHOOT3 menu for the 'AF Method' setting.
If it is set to 'Face + Tracking' try changing it to '1-point AF'


That's the only setting I have found that causes this type of flickering on my camera.


Phil.

Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: G5X Porting.
« Reply #42 on: 17 / August / 2019, 00:52:20 »
I have added 101a and 101b versions to the auto-build server since these seem to be working.


I have also checked in changes to reduce the flickering when using Face+Tracking AF.


The CHDK UI should now work when using the EVF (although edge detection is currently not working in the EVF).


Phil.

Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline marcux

  • *
  • 4
Re: G5X Porting.
« Reply #43 on: 17 / August / 2019, 12:01:52 »
Thank you very much, This last version goes much better.

Quote
Can you check the Canon settings in the SHOOT3 menu for the 'AF Method' setting.
If it is set to 'Face + Tracking' try changing it to '1-point AF'


That's the only setting I have found that causes this type of flickering on my camera.

Yes, there is still some kind of "rebound" in the menu like  we see in the video when 'AF Method' is set to 'Face + Tracking'.

As for the rest, as far as i have seen, every thing work well

Logged
*

Offline 000gui

  • *
  • 8
Re: G5X Porting.
« Reply #44 on: 17 / August / 2019, 17:45:02 »
Phil, great job spotting the root cause of the flickering. Thanks a lot for your port. I will soon try your last update.
Logged
*

Offline power1001

  • *
  • 6
Re: G5X Porting.
« Reply #45 on: 09 / September / 2019, 21:01:20 »
I have 101C.  Will that need a new port ?
Logged
G5X_101c, SX50HS, SX280HS, SD790IS
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: G5X Porting.
« Reply #46 on: 10 / September / 2019, 01:13:59 »
Quote from: power1001 on 09 / September / 2019, 21:01:20
I have 101C.  Will that need a new port ?


Probably; but we need the firmware dump to check.

Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline power1001

  • *
  • 6
Re: G5X Porting.
« Reply #47 on: 10 / September / 2019, 17:34:11 »
Is there a firmware dump SD card image somewhere I could download and use instead of trying to figure out how to create one ?
Logged
G5X_101c, SX50HS, SX280HS, SD790IS
*

Offline reyalp

  • ******
  • 14128
Re: G5X Porting.
« Reply #48 on: 10 / September / 2019, 23:15:36 »
Quote from: power1001 on 10 / September / 2019, 17:34:11
Is there a firmware dump SD card image somewhere I could download and use instead of trying to figure out how to create one ?
Nope, follow the card preparation instructions linked from https://chdk.fandom.com/wiki/Canon_Basic/Scripts/Dumper and then run the script.

I guess we could in theory make a small card image for people to write with etcher or dd. The sticking point for CHDK is expanding use the whole card size, but for dumping it would just need to be bigger than a plausible dump.
Logged
Don't forget what the H stands for.
*

Offline power1001

  • *
  • 6
Re: G5X Porting.
« Reply #49 on: 11 / September / 2019, 20:09:15 »
I did a firmware dump of my G5X 101C.  Placed it here.  I think its is available to download.
https://www.dropbox.com/preview/Public/PRIMARY.BIN?role=personal
Logged
G5X_101c, SX50HS, SX280HS, SD790IS
Pages: 1 2 3 4 [5] 6 7 8 9 10   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal