The interval was 30 sec, so i can't imagine that is quick enough to heat it up that much.
maybe I'm mistaken and it is normal for an aps-c sensor, but the log i posted a while back had tsens of over 50C, the log from a few days back still had 45C. although iso was only 200.The interval was 30 sec, so i can't imagine that is quick enough to heat it up that much.
FWIW, I wouldn't be surprised to see >50c in warm ambient conditions with a script like rawopint. (lack of surprise should not be taken as any judgement on whether it's healthy or not )
My SX50 crashes with rawopint when I attach a LED lamp in the hot shoe. This happens only with an interval > 10s.
Try reproducing it without CHDK, if you're interested.
You might be able to work it around by enabling hotshoe override in the enhanced photo operations menu.
On my EOS M100 I can shoot in continuous mode with an interval from 0.1s (up to 20 images).After 20 images it goes down to 0.35s.With rawopint the maximum interval is only 0.7s. I try to optimize the parameter but that didn’t help. Any idea where the time remains?
Unless you've accidentally enabled CHDK raw (the script option only controls CHDK raw, not native Canon raw),
If you haven't already, you could try "quick" mode. Normally it's slower, but if cont isn't getting the full speed who knows...
I guess something about the way CHDK hooks work doesn't allow it to run at the full continuous speed.
Started by rosspian
Started by reyalp
Completed and Working Scripts
Started by Stephan
« 1 2 »
General Help and Assistance on using CHDK stable releases