SX520 HS 100c firmware dump - Firmware Dumping - CHDK Forum
« previous next »
Pages: [1]   Go Down

SX520 HS 100c firmware dump

  • 7 Replies
  • 9300 Views
*

Offline frankz

  • *
  • 2
SX520 HS 100c firmware dump
« on: 25 / December / 2015, 18:14:58 »
Advertisements
Hey. I'm completely new to this forums.
So I got the camera yesterday (greeat gift) and already trying to find a CHDK port to it.
Sadly haven't found no one yet.
So I post here my firmdump for any skilled developer to work on it!
I hope someone will do any improvement.
Thank you already! :)

DOWNLOAD
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SX520 HS 100c firmware dump
« Reply #1 on: 25 / December / 2015, 19:26:05 »
Welcome and thanks for the dump.

link> CHDK Wiki Page for the SX520

In case you have not seen it,  here's a little bit of information about the CHDK porting process :

link> CHDK FAQ : My camera isn't ported yet
« Last Edit: 25 / December / 2015, 19:28:52 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline srsa_4c

  • ******
  • 4451
Re: SX520 HS 100c firmware dump
« Reply #2 on: 25 / December / 2015, 19:48:10 »
Turns out
Quote from: waterwingz on 25 / December / 2015, 19:26:05
My camera isn't ported yet
is not entirely accurate...

sx520 100c and sx530 100c have the same firmware from CHDK perspective (they do have different build timestamp though).

From their specs:
sx530
- 50x zoom lens, 24...1200 mm eqv. focal length
- Wifi
- movie format: MP4 (h.264 + AAC-LC)

sx520
- 42x zoom lens, 24...1008 mm eqv. focal length
- no Wifi
- movie format: MOV (h.264 + linear PCM)

:blink:

Unfortunately, the sx530 100c port is only half-done with no active developer.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SX520 HS 100c firmware dump
« Reply #3 on: 25 / December / 2015, 20:58:01 »
Quote
Unfortunately, the sx530 100c port is only half-done with no active developer.
So the wiki page link I posted is still quite appropriate.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline frankz

  • *
  • 2
Re: SX520 HS 100c firmware dump
« Reply #4 on: 26 / December / 2015, 14:03:03 »
Waterwingz, I've seen the two help pages you told me, but none of them was useful to me, as a amateur programmer.
So that's why I created this thread, for the people who can actually work on a solution.
But, thanks, anyway!
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SX520 HS 100c firmware dump
« Reply #5 on: 26 / December / 2015, 15:06:43 »

Quote from: frankz on 26 / December / 2015, 14:03:03
So that's why I created this thread, for the people who can actually work on a solution.
FWIW, there are only a couple of people currently active who can create a CHDK port. And they are not exactly looking for additional projects.  Very few people have come forward to attempt their first port recently.  So you may not see a lot of activity here.

And be aware that your camera is a DIGIC4+.  These cameras are somewhat harder to port.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline srsa_4c

  • ******
  • 4451
Re: SX520 HS 100c firmware dump
« Reply #6 on: 26 / December / 2015, 20:24:53 »
Quote from: frankz on 26 / December / 2015, 14:03:03
as a amateur programmer
As I mentioned above, the current sx530 port can be used to make a port for this camera, with very little changes. However, that port is missing some important adjustments to make it usable. Someone with the camera is needed to do the necessary investigation & tests.
Quite a number of people requested an sx520 port so far, but no-one willing to work on it has shown up.
Try building CHDK for the sx530. If you succeed and have some C programming knowledge, consider working on the port - you can get help here in the forum.
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: SX520 HS 100c firmware dump
« Reply #7 on: 29 / December / 2015, 04:15:45 »
Quote from: fe50 on 29 / December / 2015, 04:14:53
Added the
  • SX520 1.00C
full 16MB dump by frankz from this forum post to the CHDK P&S FW dumps repository.
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal