i just bought a ref M10, so i want to be tester of your porting!
First, you need to determine the firmware version of your camera. If it displays less than 1.1.0 in the camera menu, use the official upgrade (from the Canon support site) to update it - it will then be compatible with the release attached to
this post.
If it currently displays 1.1.0, it may or may not be compatible (as you can read a few posts above yours).
Get a JPEG image shot with the camera, using a card reader. You can then use an application like
STICK to check the firmware version. If you're comfortable with command line, you can also use
ExifTool on the image.
and.....i have question for the unofficial release, is the intervalometer feature working yet?
Intervalometer
scripts should work. I'm currently researching why CHDK exposure overrides become ineffective when the shutter is kept halfway down for a longer time.
maybe a downgrade to 1.0.0 works then an upgrade to 110d - I could give this a try if there is a 1.0.x version available somewhere
As far as I know, the 1.1.0 update is the only official one.
