eos M10 port

  • 148 Replies
  • 33083 Views
Re: eos M10 port
« Reply #40 on: 04 / February / 2017, 05:04:15 »
Advertisements
I don’t want to waste your time but running drtest.lua and the following stuff would be interesting….

https://chdk.setepontos.com/index.php?topic=13004.0
https://chdk.setepontos.com/index.php?topic=12165.0


Hello there,

I run all three. I put the csv files in my Dropbox since I can only upload two files.
https://www.dropbox.com/sh/mfuic9pmh0qz602/AAC1bEdA_c8_0hDHOwYuHGN7a?dl=0

Please tell me if you need me to change any of the settings. :)

Re: eos M10 port
« Reply #41 on: 04 / February / 2017, 07:49:51 »
Thank you for doing this. I will in investigate it in the threads above...
drtest has nur results....
« Last Edit: 04 / February / 2017, 08:05:16 by c_joerg »
EOS M3 101a, 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), IXUS160 (100a), IXUS30 (100k), 2*S45,
Flickr https://www.flickr.com/photos/[email protected]/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd

*

Offline udo

  • ***
  • 119
Re: eos M10 port
« Reply #42 on: 16 / February / 2017, 09:19:00 »
This camera (M10) looks like an upgrade in various ways to my S110 (and SX260).
Can I help with testing or similar?
Or just wait for new releases?

Canon EOS M10 owner / vintage lenses / RAW Re: eos M10 port
« Reply #43 on: 16 / February / 2017, 19:55:17 »
Hi there, Since today I am the proud but perplexed owner of a Canon EOS M10. I ran Magic Lantern on my now half-dead "M" to run a pair of old Pentax K lenses. I was kind of surprised, apart from the flimsy construction, that the "M10" runs on different firmware than the "M" and does not react to ML. No way to get the shutter working with the old lenses and, no RAW!
My question: What is the status of the CHDK "M10" port? I only need shutter control and RAW.
Cheers,
Laurens
 



*

Offline srsa_4c

  • ******
  • 3455
Re: Canon EOS M10 owner / vintage lenses / RAW Re: eos M10 port
« Reply #44 on: 16 / February / 2017, 20:38:05 »
No way to get the shutter working with the old lenses
One of the C.Fn functions is "Release shutter without lens".
Quote
and, no RAW!
If you mean RAW video: that's not implemented on any CHDK supported camera at the moment. AFAIK Ant is doing some related research on the M3, but that's all.

If you have a fast UHS card, try running the benchmark and see if you can get write speeds above 20 MB/s. My attempts maxed out just below that limit.


This camera (M10) looks like an upgrade in various ways to my S110 (and SX260).
Can I help with testing or similar?
To date, I have only done some basic testing of CHDK overrides. Doing more thorough tests under various conditions (lighting, ISO, factory image enhancer functions on/off) would probably be useful.
Also, suggestions on possibly improving camera functions / usability would also be welcome.

However, if you'd like to jump to a CHDK supported interchangeable lens camera, be sure to consider the hardware limitations before buying - the M3 offers more (ext. flash, optional EVF, more buttons and dials).

*

Offline udo

  • ***
  • 119
Re: Canon EOS M10 owner / vintage lenses / RAW Re: eos M10 port
« Reply #45 on: 17 / February / 2017, 09:38:59 »
However, if you'd like to jump to a CHDK supported interchangeable lens camera, be sure to consider the hardware limitations before buying - the M3 offers more (ext. flash, optional EVF, more buttons and dials).
For me it is just a (hopefully) better SX260 or S110.
I.e.: a P&S camera with larger ISO range and also a better camera to do (night time or perhaps also day time) timelapses.

*

Offline Ant

  • ****
  • 301
Re: Canon EOS M10 owner / vintage lenses / RAW Re: eos M10 port
« Reply #46 on: 17 / February / 2017, 11:00:00 »
Also, suggestions on possibly improving camera functions / usability would also be welcome.

I suspect M10 has the same IS problems as M3 and M5

*

Offline udo

  • ***
  • 119
Re: Canon EOS M10 owner / vintage lenses / RAW Re: eos M10 port
« Reply #47 on: 17 / February / 2017, 11:03:25 »
Also, suggestions on possibly improving camera functions / usability would also be welcome.

I suspect M10 has the same IS problems as M3 and M5
Hmm. Could CHDK help here?
I.e.: basically shut off the IS when not needed? (thus saving battery)


*

Offline Ant

  • ****
  • 301
Re: Canon EOS M10 owner / vintage lenses / RAW Re: eos M10 port
« Reply #48 on: 17 / February / 2017, 11:05:47 »
If you have a fast UHS card, try running the benchmark and see if you can get write speeds above 20 MB/s. My attempts maxed out just below that limit.

I wonder how did they measure 80MB/s.

*

Offline Ant

  • ****
  • 301
Re: Canon EOS M10 owner / vintage lenses / RAW Re: eos M10 port
« Reply #49 on: 17 / February / 2017, 11:11:07 »
Hmm. Could CHDK help here?
I.e.: basically shut off the IS when not needed? (thus saving battery)
Exactly.
Another problem is camera stuck during power off with non Canon IS lens.
« Last Edit: 17 / February / 2017, 11:14:13 by Ant »

 

Related Topics