has somebody thought of a way to move to the left when setting values instead of the non-available zoom buttons on the m10?.....
Hi thereSince I am completely new in CHDK and everything similar I did not quite understand some of the things discussed in this topic (mainly because I am not into this kind of coding/developing) So here a quick question:Am I able with the stuff on CHDK for the M10 to deactivate the automatic LCD Display off? Better said, can I turn this off for the HDMI output?I wanted to use the m10 as my streams main camera, but with the display output turning off after 3 minutes (longest time I can set) this is not possible
I noticed that the largest aperture I can choose to override in CHDK's menus is f/1.8.
There are some lenses with larger apertures, such as the Canon EF-M 32mm f/1.4 lens. Is it possible to extend the aperture range so that a lens like the Canon 32mm will be fully supported by CHDK at its largest aperture?
I only use the Cannon 22mm f/2 lens (I didn't buy the more expensive 32mm f/1.4 lens yet). Here are its values.First column corresponds to 23 value, second to 29 value. f-numbers tested in descending order: f/2, f/2.2, f/2.5, f/2.8, f/3.2, f/3.5, f/4, f/4.5, f/5, f/5.6, f/6.3, f/7.1, f/8192 192228 224252 256288 288324 320348 352384 384420 416444 448480 480516 512540 544576 576
Looks like User Av steps are 1/3EV apart and the displayed values are only approximations.
Added larger apertures (f/1.2, 1.4 ...).
Started by axman
« 1 2 3 »
Started by burglar
Creative Uses of CHDK
Started by reyalp
Started by David475