eos M10 port - page 33 - DryOS Development - CHDK Forum

eos M10 port

  • 326 Replies
  • 218793 Views
*

Offline Caefix

  • *****
  • 856
  • Sorry, busy deleting test shots...
Re: eos M10 port
« Reply #320 on: 09 / June / 2022, 13:08:30 »
Advertisements
https://www.dxomark.com/Cameras/Compare/Side-by-side/Canon-EOS-M3-versus-Canon-EOS-M10-versus-Canon-EOS-M100___1019_1048_1179

Same specs here,  ;) ... 1/4000-30 sec, but there are differences in // platform/../shooting.c
const ShutterSpeed shutter_speeds_table[]
All lifetime is a loan from eternity.

Re: eos M10 port
« Reply #321 on: 09 / June / 2022, 14:28:17 »
Thanks to @c_joerg @philmoz @srsa_4c @reyalp

Just reporting that I received my M10 today (111a) and have successfully got CHDK up and running from the XIMR build set.

I can confirm all looks OK and my bracketing script runs on the M3 and M10, ie all the peeks (focus position and lens name) are OK on both Cams.

The CHDK histogram seems OK and Zebras seem to work with under/over thresholds set to 2.

https://photography.grayheron.net/2022/06/landscape-bracketing-script-now.html

Cheers

Garry
« Last Edit: 10 / June / 2022, 03:12:50 by pigeonhill »

*

Offline reyalp

  • ******
  • 13718
Re: eos M10 port
« Reply #322 on: 25 / June / 2022, 14:11:42 »
I moved most of the M100 discussion to the M100 thread: https://chdk.setepontos.com/index.php?topic=13943.msg148547#msg148547
Don't forget what the H stands for.

Re: eos M10 port
« Reply #323 on: 25 / June / 2022, 14:39:46 »


Re: eos M10 port
« Reply #324 on: 11 / July / 2022, 01:18:32 »
Sorry if this has been covered before, how do I find out which 1.10 firmware is on my camera? I see from the build page there is a version D, F, and G; is it ok to flash any letter 1.10?

*

Offline reyalp

  • ******
  • 13718
Re: eos M10 port
« Reply #325 on: 11 / July / 2022, 03:08:56 »
Sorry if this has been covered before, how do I find out which 1.10 firmware is on my camera?
You can one of the tools mentioned on https://chdk.fandom.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera? or a Canon basic script https://chdk.fandom.com/wiki/Canon_Basic/Scripts/Firmware_Info or from the EXIF of a jpeg. Note the EXIF tag you want is the canon makernote value exiftool calls "Firmware Revision" which will have a value like "1.00 rev 1.00" for 100a, and is not displayed by some software.

The ver.req / vers.req method mentioned in the FAQ reportedly does not work on M10.

Quote
I see from the build page there is a version D, F, and G; is it ok to flash any letter 1.10?
You should only install the version exactly matching your cameras firmware.
Don't forget what the H stands for.

Re: eos M10 port
« Reply #326 on: 11 / July / 2022, 03:15:49 »
Thanks for the info, I used ACID and I had 1.10D installed, have CHDK on now
« Last Edit: 12 / July / 2022, 02:33:04 by thejaredhuang »

 

Related Topics