24 or more A550 cameras to fire at once - page 3 - Hotwire! Hardware Mods, Accessories and Insights - CHDK Forum
« previous next »
Pages: 1 2 [3] 4   Go Down

24 or more A550 cameras to fire at once

  • 30 Replies
  • 18548 Views
*

Offline reyalp

  • ******
  • 14128
Re: 24 or more A550 cameras to fire at once
« Reply #20 on: 22 / May / 2016, 05:02:16 »
Advertisements
Quote from: ahull on 22 / May / 2016, 04:48:19
You will also need to check the camera supports this function, if so, then yes, dual use of the USB is possible although you may need a custom build of CHDK.
As of CHDK 1.4, it should be supported on almost every camera.
Logged
Don't forget what the H stands for.
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: 24 or more A550 cameras to fire at once
« Reply #21 on: 22 / May / 2016, 05:27:24 »
Quote from: reyalp on 22 / May / 2016, 05:02:16
Quote from: ahull on 22 / May / 2016, 04:48:19
You will also need to check the camera supports this function, if so, then yes, dual use of the USB is possible although you may need a custom build of CHDK.
As of CHDK 1.4, it should be supported on almost every camera.
Wiki updated.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline halfpipe

  • *
  • 14
Re: 24 or more A550 cameras to fire at once
« Reply #22 on: 22 / May / 2016, 08:46:27 »
You folks are amazing
I don't know the protocol regarding asking for help with script writing as I'm more or less illiterate in computer languages but will be happy to paypal someone for their time to consult on this with me.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: 24 or more A550 cameras to fire at once
« Reply #23 on: 22 / May / 2016, 09:58:42 »
Quote from: halfpipe on 22 / May / 2016, 08:46:27
I don't know the protocol regarding asking for help with script writing as I'm more or less illiterate in computer languages but will be happy to paypal someone for their time to consult on this with me.
I can't speak for anyone else, but I will point out that you can most likely get all the help you need for free here just by reading and asking questions.

Have you read through this thread : 
Noob question, how to run multicam.lua on chdkptp ? The multicam.lua script may cover everything you will need.

Other threads are listed here - some will be more useful than others :
CHDK Forum Threads - PTP
CHDK Forum Threads - Multicamera Rigs

EDIT :  here's a useful search link if you want to study more about multicam.lua
« Last Edit: 22 / May / 2016, 10:28:47 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline andrew.stephens.754365

  • ****
  • 461
Re: 24 or more A550 cameras to fire at once
« Reply #24 on: 23 / May / 2016, 05:12:01 »
I had previously briefly tested usb_sync_wait here https://chdk.setepontos.com/index.php?topic=12343.msg121994#msg121994

Based on reyalp's comment here
Quote from: reyalp on 23 / June / 2014, 00:56:17

I'm not sure what is intended here by "start the shooting process"


If this includes pressing the shoot button, you will need to make sure that multicam isn't trying to poll the camera  waiting for the shot to complete. At a minimum this means you need to use mc:cmd() instead of mc:cmdwait(). I'm not sure off the top of my head if other changes will be required.

I only just added this to multicam.lua camera side code as a simple test:
Code: [Select]
function cmds.usb_sync_wait()
   usb_force_active(1)
   usb_sync_wait(1)
   press('shoot_full')
   sleep(10000)
   release('shoot_full')
end   
and ran it like this:
Code: [Select]
___> !mc=require('multicam')
___> !mc:connect({list='C:/CHDKPTP/listfile'})
+ 1:Canon PowerShot SX150 IS b=\\.\libusb0-0001--0x04a9-0x3234 d=bus-0 s=78FF059
B30614728892637799CB908C8
___> !mc:start()
___> !return mc:cmdwait('rec')
rec
___> !return mc:cmdwait('preshoot')
preshoot
___> !mc:cmd('usb_sync_wait')
usb_sync_wait (Edit: Note, do +5V -> 0V transistion sometime between here and 10 sec timeout to release hook & then go back to +5V ready for next shot)
___> !return mc:cmdwait('preshoot')
preshoot
___> !mc:cmd('usb_sync_wait')
usb_sync_wait (Edit: Note, do +5V -> 0V transistion sometime between here and 10 sec timeout to release hook & then go back to +5V ready for next shot)
___> !return mc:cmdwait('preshoot')
preshoot
___> !mc:cmd('usb_sync_wait')
usb_sync_wait
___>
On the first 2 attempts above the hook was released as expected when the 5V->0V transistion occurred and on the 3rd attempt the hook was released after 10 seconds (with no 5V->0V transistion attempted, also as expected).

Tested with sx150is-100a-1.4.0-4164 & multicam.lua r692 (with a few local changes)

PS: my multicam.lua redirects preshoot status to file & therefore not visible in console copy above. 
PPS: font size 9 would be better if available.
« Last Edit: 05 / January / 2017, 10:05:46 by andrew.stephens.754365 »
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: 24 or more A550 cameras to fire at once
« Reply #25 on: 23 / May / 2016, 09:46:08 »
Quote from: andrew.stephens.754365 on 23 / May / 2016, 05:12:01
On the first 2 attempts above the hook was released as expected when the 5V->0V transistion occurred and on the 3rd attempt the hook was released after 10 seconds (with no 5V->0V transistion attempted, also as expected).
So does your somewhat lengthy post simply mean that everything works as expected?
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline andrew.stephens.754365

  • ****
  • 461
Re: 24 or more A550 cameras to fire at once
« Reply #26 on: 23 / May / 2016, 09:53:33 »
Quote from: waterwingz on 23 / May / 2016, 09:46:08
So does your somewhat lengthy post simply mean that everything works as expected?


If you don't like the comment - ignore it!
Logged
*

Offline halfpipe

  • *
  • 14
Re: 24 or more A550 cameras to fire at once
« Reply #27 on: 23 / May / 2016, 12:57:43 »
is that what it said? Ok so an endorsement then!   cool
can you point me to the script please
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: 24 or more A550 cameras to fire at once
« Reply #28 on: 23 / May / 2016, 13:05:23 »
Quote from: andrew.stephens.754365 on 23 / May / 2016, 09:53:33
If you don't like the comment - ignore it!
Sorry, it was intended as a legitimate question.  Reading your post, it sounded like everything was working as expected. I was trying to make sure I had not misinterpreted it or missed some subtlety.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline andrew.stephens.754365

  • ****
  • 461
Re: 24 or more A550 cameras to fire at once
« Reply #29 on: 23 / May / 2016, 13:38:15 »
Quote from: waterwingz on 23 / May / 2016, 13:05:23

Sorry, it was intended as a legitimate question.


Ah, ok - words are easy to misinterpret...my apologies too.


Quote from: waterwingz on 23 / May / 2016, 13:05:23
Reading your post, it sounded like everything was working as expected. I was trying to make sure I had not misinterpreted it or missed some subtlety.

Yes, everything working as I had expected.

I was hoping the way I structured my comment could:
  • facilitate halfpipe pick up how to manipulate multicam.lua for personal benefit
  • perhaps prompt reyalp (or someone) to make a usually useful extra comment or code hint - no status return as structured is a particular concern.
« Last Edit: 23 / May / 2016, 14:32:12 by andrew.stephens.754365 »
Logged
Pages: 1 2 [3] 4   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal