SX400IS porting thread - DryOS Development - CHDK Forum
« previous next »
Pages: [1] 2 3 4 5 6 7   Go Down

SX400IS porting thread

  • 64 Replies
  • 67851 Views
*

Offline nafraf

  • *****
  • 1308
SX400IS porting thread
« on: 25 / April / 2016, 01:32:27 »
Advertisements
I'm working on sx400is port (100b). If someone is willing to test, please post here or send me an PM.
Logged
*

Offline astol

  • *
  • 10
Re: SX400IS porting thread
« Reply #1 on: 01 / June / 2016, 07:53:18 »
Hi, I would like to test it on my camera.
Logged
*

Offline nafraf

  • *****
  • 1308
Re: SX400IS porting thread
« Reply #2 on: 02 / June / 2016, 11:31:03 »
@astol: I sent you the link via PM. Please test and report the results.
Logged
*

Offline astol

  • *
  • 10
Re: SX400IS porting thread
« Reply #3 on: 04 / June / 2016, 12:07:02 »
I've made some testing. See the report below:

CHDK for sx400is-100b
//Report on testing by Astol no.1
-----------------

I've managed how it goes with starting. It depends on the time I hold the play button. If I just click it, camera starts in photo mode. If I hold it, camera starts in the play mode.
But if I hold it too long, camera Shows the splashscreen and turns off – bug.

When I open the flash and set it on automatic, It shoots only when flash is required. When the automatics decide to not use the flash It will not shoot until the flash is open (or automatics turned off)

Games are working fine

Tools are working fine

Settings works fine

Live histogram works fine

Changing flash intensity works fine

Zebra is not working properly. Problem is that it shows red rectangles in upper and lower part of display and covers the wiew.

Raw shooting works, but is not much useful (fisheye effect)

Scripts are working fine (I've not tried remote and some of the test scripts)
Logged
*

Offline nafraf

  • *****
  • 1308
Re: SX400IS porting thread
« Reply #4 on: 05 / June / 2016, 17:20:32 »
Quote from: astol on 04 / June / 2016, 12:07:02
I've managed how it goes with starting. It depends on the time I hold the play button. If I just click it, camera starts in photo mode. If I hold it, camera starts in the play mode.
But if I hold it too long, camera Shows the splashscreen and turns off – bug.
I sent you a new version, please check the power up behavior.
The power up behavior depends on button used:
- Playback button pressed, camera should start in playback mode.
- Power button pressed for less than a second, camera should start in playback mode.
- Power button pressed for more than a second, camera should start in record mode.

EDIT: Fix typo "start in record mode" thanks to reyalp.
« Last Edit: 05 / June / 2016, 20:17:54 by nafraf »
Logged
*

Offline reyalp

  • ******
  • 14126
Re: SX400IS porting thread
« Reply #5 on: 05 / June / 2016, 18:51:17 »
Quote from: nafraf on 05 / June / 2016, 17:20:32
- Power button pressed for less than a second, camera should start in playback mode.
- Power button pressed for more than a second, camera should start in playback mode.
Typo alert: Second should probably be "start in record"
Logged
Don't forget what the H stands for.
*

Offline astol

  • *
  • 10
Re: SX400IS porting thread
« Reply #6 on: 06 / June / 2016, 08:20:46 »
Quote from: nafraf on 05 / June / 2016, 17:20:32
I sent you a new version, please check the power up behavior.
Thank you, the power up behavior works as you described.
Logged
*

Offline astol

  • *
  • 10
Re: SX400IS porting thread
« Reply #7 on: 09 / June / 2016, 11:32:10 »
I've made a series of tests described at http://chdk.wikia.com/wiki/Testing
See the results:

Testing overrides ✓

Testing RAW/DNG ✓

   File counter ✓

   File folders ✓

Free RAM ✓

Viewport buffers ‼
   
   Zebra test → Shows red rectangles in upper and lower part of display and covers the wiew. Indicator is offset.

USB Remote ✓

Testing with scripts

   isobase.lua ??
      shows "set CAM_MARKET_ISO_BASE 200"
      (I am not sure, if it is ok.)

   mftest.lua ✓

   llibtst.lua ✓
   
   setmode.lua ✓
   
   ubtest.bas ✓
   
   MD_tune.bas ✓
   
   hooktest.lua ✓

One more bug during testing (maybe it have nothing to do with CHDK). Once I turned the camera off and the objective did not slip in. To turn the camera on I had to remove the batterry.
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: SX400IS porting thread
« Reply #8 on: 09 / June / 2016, 16:17:18 »
Quote from: astol on 09 / June / 2016, 11:32:10
Viewport buffers ‼
   
   Zebra test → Shows red rectangles in upper and lower part of display and covers the wiew. Indicator is offset.
It's possible that some of the viewport related stuff is incorrect (not easy to get that right without the camera). Can you upload a photo that shows the wrong zebra?
Quote
One more bug during testing (maybe it have nothing to do with CHDK). Once I turned the camera off and the objective did not slip in. To turn the camera on I had to remove the batterry.
Similar things can happen if CHDK gets viewport/display dimensions wrong, especially when zebra is enabled.
Logged
*

Offline astol

  • *
  • 10
Re: SX400IS porting thread
« Reply #9 on: 09 / June / 2016, 17:09:16 »
Quote from: srsa_4c on 09 / June / 2016, 16:17:18
It's possible that some of the viewport related stuff is incorrect (not easy to get that right without the camera). Can you upload a photo that shows the wrong zebra?
Here is the photo. Rectangles are black now sometimes it is drown with zebra texture.
Logged
Pages: [1] 2 3 4 5 6 7   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal