1. Can I override (lower) fps in video mode? The reason I want this is to shoot timelapse videos directly from camera.
2. Today I tried to use motion detection script ("embedded" in the last CHDK so-called stable version) to take some lightning pictures. Unfortunatelly, camera detected continuously raindrops and took pictures almost every second.
PS: anyway, fps override may be possible in the future or Canon firmware don't allow it?
Shameless self promotion
If you want timelapse with relatively high frame rate, my script http://chdk.wikia.com/wiki/Lua/Scripts:_Raw_Meter_Intervalometer allows capturing stills at close to the Canon continuous shooting rate, with very good exposure control.
Cameras that have "miniature effect" video can probably use this script (disclaimer: I did not try it) made by fabri22. It allows removing the blurred area, and video framerate is significantly reduced in this mode.
I'll test those scripts. For now, I tested scripts for lightning photo, but they are either not functional (camera take pictures continuously) or too sensitive and it's very difficult to fine tune them. But I'm tenacious and I hope someday to succeed.
But I need to perform a fine tuning, because sometime it takes pictures randomly.
Started by hiker_jon General Discussion and Assistance
Started by colio General Help and Assistance on using CHDK stable releases
Started by Alarik General Help and Assistance on using CHDK stable releases
Started by XgQoRl8sPyW5 Hotwire! Hardware Mods, Accessories and Insights
Started by javedjoe90 General Help and Assistance on using CHDK stable releases