PowerShot SX600 HS - General Help and Assistance on using CHDK stable releases - CHDK Forum  

PowerShot SX600 HS

  • 14 Replies
  • 7921 Views
PowerShot SX600 HS
« on: 21 / May / 2016, 11:48:07 »
Advertisements
Hi I need to take timelapse photos with my PowerShot SX600 HS camera and I was wondering if CHDK flavor for this one is going to materialize any soon ?

(I need it to take pictures from my drone at some time intervals)
Thanks!

sorry, I put this question in wrong category
« Last Edit: 21 / May / 2016, 13:00:30 by flycanon »

*

Offline reyalp

  • ******
  • 14121
Re: PowerShot SX600 HS
« Reply #1 on: 21 / May / 2016, 14:54:19 »
Hi I need to take timelapse photos with my PowerShot SX600 HS camera and I was wondering if CHDK flavor for this one is going to materialize any soon ?
Unfortunately, there is currently no CHDK port for SX600HS. See the FAQ for more about what this means.

There was a porting thread for SX600, but as far as I can tell nothing significant came out of it https://chdk.setepontos.com/index.php?topic=11520.msg112908#msg112908

Quote
sorry, I put this question in wrong category
No problem, I moved it to a more appropriate one.
Don't forget what the H stands for.

Re: PowerShot SX600 HS
« Reply #2 on: 21 / May / 2016, 19:17:52 »
thanks,  will be waiting for someone enthusiastic to do it :)

Re: PowerShot SX600 HS
« Reply #3 on: 27 / April / 2023, 14:56:55 »
Hi, this topic seems to have gone dormant for a while :)
I've been wishing to use CHDK on SX600HS ever since I got it (used it a lot on older cameras), but looks like there's no build for it.
There are for SX610HS and SX620HS - are they too different to even attempt using?


*

Offline reyalp

  • ******
  • 14121
Re: PowerShot SX600 HS
« Reply #4 on: 27 / April / 2023, 19:05:32 »
There are for SX610HS and SX620HS - are they too different to even attempt using?
Yes, unfortunately there is no chance that those will run on SX600, it would need a new port.
Don't forget what the H stands for.

*

Offline blackhole

  • *****
  • 945
  • A590IS 101b
    • Planetary astrophotography
Re: PowerShot SX600 HS
« Reply #5 on: 28 / April / 2023, 03:59:23 »
Hi, this topic seems to have gone dormant for a while :)
I've been wishing to use CHDK on SX600HS ever since I got it (used it a lot on older cameras), but looks like there's no build for it.
There are for SX610HS and SX620HS - are they too different to even attempt using?
It seems to be the last unsupported camera model from the pre-DIGIC6 processor era, I can no longer sleep peacefully knowing this. :D
I will make a port for sx600 but you have to tell me what firmware version you have and you have to be prepared for a few failed attempts before we get a usable port.
I don't have a camera, so you'll have to do all the testing yourself. If you're ready to do it, let me know, without the possibility of testing, there's no point in trying to make a new port.
https://chdk.fandom.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F

Re: PowerShot SX600 HS
« Reply #6 on: 28 / April / 2023, 06:43:32 »
Absolutely, thank you so much :)

Had to check ver[\s].req methods, those don't seem to work on this one anymore.
The ACID tool says firmware version is "100d".
Canon site does not seem to have any firmware updates available at all.

Re: PowerShot SX600 HS
« Reply #7 on: 28 / April / 2023, 06:46:20 »
Yes, unfortunately there is no chance that those will run on SX600, it would need a new port.

Thanks, hopefully some working build can fill that gap in near future :)


*

Offline Caefix

  • *****
  • 947
  • Sorry, busy deleting test shots...
Re: PowerShot SX600 HS
« Reply #8 on: 28 / April / 2023, 13:22:00 »
Quote
//   Firmware Ver GM1.00F   // Found @ 0xff0a50f4, "GM1.00F" @ 0xff0a5101
//   Firmware build timestamp: Jul 14 2014 08:40:45
//   Canon PowerShot SX600 HS
//   PLATFORMOSVER = 54
//   PLATFORMID = 12934# (0x3286) Found @ 0xfff40040
EDIT: Link removed - website tries to install 'Flash' player, looks suspicious. (philmoz)

Edit: Same 18* lens as SX610hs
Code: [Select]
// main.c; Focus length table in firmware @ 0xfff4d62c
#define NUM_FL      101
#define NUM_DATA    2   
extern int focus_len_table[NUM_FL*NUM_DATA];

// Conversion factor lens FL --> 35mm equiv
// lens      35mm     CF
// ----      ----     --
// 4.5         25      ( 25/4.5) * 45 = 250  (min FL)
// 81.0       450      (450/81) * 45 = 250  (max FL)
#define CF_EFL      250
#define CF_EFL_DIV  45
&& cam can zoom slow and fast.  :)
« Last Edit: 28 / April / 2023, 17:26:49 by philmoz »
All lifetime is a loan from eternity.

*

Offline blackhole

  • *****
  • 945
  • A590IS 101b
    • Planetary astrophotography
Re: PowerShot SX600 HS
« Reply #9 on: 29 / April / 2023, 04:05:50 »
Quote
//   Firmware Ver GM1.00F   // Found @ 0xff0a50f4, "GM1.00F" @ 0xff0a5101
//   Firmware build timestamp: Jul 14 2014 08:40:45
//   Canon PowerShot SX600 HS
//   PLATFORMOSVER = 54
//   PLATFORMID = 12934# (0x3286) Found @ 0xfff40040
You can add the stubs_entry.S file as an attachment to the post.

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal