A2500 porting thread - page 16 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 11 12 13 14 15 [16]   Go Down

A2500 porting thread

  • 157 Replies
  • 78165 Views
*

Offline reyalp

  • ******
  • 14140
Re: A2500 porting thread
« Reply #150 on: 20 / August / 2014, 23:22:02 »
Advertisements
FWIW, I believe the elph130 also suffers from this issue. I haven't got around to investigating.
Logged
Don't forget what the H stands for.
*

Offline artanim

  • *
  • 7
Re: A2500 porting thread
« Reply #151 on: 21 / August / 2014, 03:18:04 »
Quote from: srsa_4c on 20 / August / 2014, 15:40:05
Quote from: waterwingz on 20 / August / 2014, 08:32:12
The zoom and focus code controlling the lens mechanisms seems to vary a lot between camera models.
Several newer low-end models seem to use a common 5x zoom lens (specs are the same, the exterior looks the same). My guess is that the lens related code is likely similar.
In this case, I would try looking at the a1400 code (same generation camera, same lens, no IS). Its platform_camera.h already includes the defines suggested by msl, and even more.

I tried on the A1400 and it does not present that problem. So that's maybe the good idea...
Logged
*

Offline artanim

  • *
  • 7
Re: A2500 porting thread
« Reply #152 on: 21 / August / 2014, 03:42:08 »
Quote from: msl on 20 / August / 2014, 09:24:52
Maybe helps
Code: [Select]
#define CAM_USE_ALT_PT_MoveOpticalZoomAt 1in camera_platform.h

Check also
Code: [Select]
#define CAM_USE_ALT_SET_ZOOM_POINT       1
msl

I recompiled CHDK for the A2500 (trunk 3585) with the proposed modification and it solved the problem! The lens distortion is now correctly taken into account.
Good guess!
Logged
*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: A2500 porting thread
« Reply #153 on: 21 / August / 2014, 09:07:10 »
Quote from: artanim on 21 / August / 2014, 03:42:08
I recompiled CHDK for the A2500 (trunk 3585) with the proposed modification and it solved the problem!
Added in Trunk rev 3586.

msl
Logged
CHDK-DE:  CHDK-DE links
*

Offline Hardware_Hacker

  • ****
  • 322
Re: A2500 porting thread
« Reply #154 on: 06 / March / 2015, 23:32:52 »
Hi All,

I bought a "DEMO"  Ixus 145 on ebay,  the original Ixus i45 box actually contained a a2500...
So I decided to keep it as a spare.
When attempting to port my other Ixus 145 camera I then used the a2500 as a reference camera.

I then noticed that there appears to be several a2500 porting "Errors".

So as I found them I recompiled several new version's with "Error Corrections".

A very quick test confirmed that they compiled, booted and run Ok.

 @ a2500 #1   nafraf "...I started with platform files, I'm using code_gen..."

What was the "Original" reference Camera used.

Are there any other known problems with the "Stable" CHDK a2500 Port.

Comments, Anyone.

H-H

I will post the a2500 "Errors" in a later post

« Last Edit: 06 / March / 2015, 23:46:14 by Hardware_Hacker »
Logged
*

Offline reyalp

  • ******
  • 14140
Re: A2500 porting thread
« Reply #155 on: 15 / March / 2022, 16:14:15 »
Here's a test build with battery AD remote support
Logged
Don't forget what the H stands for.
*

Offline martig

  • *
  • 1
Re: A2500 porting thread
« Reply #156 on: 16 / March / 2022, 02:34:59 »
Quote from: reyalp on 15 / March / 2022, 16:14:15
Here's a test build with battery AD remote support

Many thanks, I tested it by shorting the center contact to ground through a 15K resistor. Worked like expected.
Logged
*

Offline reyalp

  • ******
  • 14140
Re: A2500 porting thread
« Reply #157 on: 16 / March / 2022, 16:44:30 »
Quote from: martig on 16 / March / 2022, 02:34:59
Many thanks, I tested it by shorting the center contact to ground through a 15K resistor. Worked like expected.
Thanks for testing. Enabled in trunk r6083 and 1.5 r6085
Logged
Don't forget what the H stands for.
Pages: 1 ... 11 12 13 14 15 [16]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal