SX20IS - CHDK wont load from bootable SD card - Hello, I'm a NEWBIE - HELP!! (Newbies assistance, User Guides and thank you notes) - CHDK Forum  

SX20IS - CHDK wont load from bootable SD card

  • 4 Replies
  • 3075 Views
SX20IS - CHDK wont load from bootable SD card
« on: 22 / August / 2016, 17:57:38 »
Advertisements
Hello,
Im new at this and I cant get this working.
I have SX20IS and its 1.0.2D firm.
I made my sd card bootable with stick and program added 102d on sd, after that I have lock the sd card but I cant get it load on camera..
Can anyone help me please? Thanks in advance
« Last Edit: 22 / August / 2016, 17:59:47 by Corsa »

*

Online reyalp

  • ******
  • 14119
Re: SX20IS - CHDK wont load from bootable SD card
« Reply #1 on: 22 / August / 2016, 21:51:35 »
What happens when you try to use the card, the camera just starts normally with no CHDK splash screen?

If CHDK doesn't start, and your camera doesn't show "card locked" the physical lock switch in your SX20 may be malfunctioning, or not working with this particular card. See this thread https://chdk.setepontos.com/index.php?topic=3374.msg31113#msg31113 for a similar case involving sx10
Don't forget what the H stands for.

Re: SX20IS - CHDK wont load from bootable SD card
« Reply #2 on: 23 / August / 2016, 05:13:35 »
What happens when you try to use the card, the camera just starts normally with no CHDK splash screen?
Yes, camera starts normally.
Im going to buy a new sd card and see what is going to happen, ill be back with results.

*

Online reyalp

  • ******
  • 14119
Re: SX20IS - CHDK wont load from bootable SD card
« Reply #3 on: 23 / August / 2016, 13:43:25 »
What happens when you try to use the card, the camera just starts normally with no CHDK splash screen?
Yes, camera starts normally.
Im going to buy a new sd card and see what is going to happen, ill be back with results.
Note the "lock" on an SD card is just a piece of plastic, the actual lock detection is done in the camera by a switch the lock tab is supposed to engage. It is possible that the card could be at fault if the lock tab is a bit out of spec, but it's more likely the camera side is at fault. A few people have reported fixing this by poking the lock switch in the card slot, see the thread I linked earlier.
Don't forget what the H stands for.


Re: SX20IS - CHDK wont load from bootable SD card
« Reply #4 on: 24 / August / 2016, 13:55:46 »
A few people have reported fixing this by poking the lock switch in the card slot.
I have poke it a few times and its working now! Thank you so much for your help!

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal