Quadrocopter and remote trigger using TX - General Help and Assistance on using CHDK stable releases - CHDK Forum supplierdeeply
« previous next »
Pages: [1]   Go Down

Quadrocopter and remote trigger using TX

  • 6 Replies
  • 4088 Views
*

Offline MaxxTT

  • *
  • 4
Quadrocopter and remote trigger using TX
« on: 17 / September / 2016, 07:44:32 »
Advertisements
By (happy) coincidence i found chdk  :D and i want to use it with my A495 cam on my quadrocopter. Until now i used intervall function of my ricoh for aerial photography, but chdk seems too be much better.

How can i realize the functionality to trigger the cam using my TX? Is there a tutorial? I found some info including an arduino board, and other info which seemed to work WITHOUT Arduino (which i would prefer). Can somebody help please?
Logged
*

Offline MaxxTT

  • *
  • 4
Re: Quadrocopter and remote trigger using TX
« Reply #1 on: 17 / September / 2016, 07:58:25 »
Quote from: MaxxTT on 17 / September / 2016, 07:44:32
By (happy) coincidence i found chdk  :D and i want to use it with my A495 cam on my quadrocopter. Until now i used intervall function of my ricoh for aerial photography, but chdk seems too be much better.

How can i realize the functionality to trigger the cam using my TX? Is there a tutorial? I found some info including an arduino board, and other info which seemed to work WITHOUT Arduino (which i would prefer). Can somebody help please?

PS: i got an BT-Module laying around, this one:
https://www.amazon.de/XINTE-Drahtlose-Bluetooth-Serial-Arduino/dp/B00H07UJL6

Could this be used as an arduino board, here?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Quadrocopter and remote trigger using TX
« Reply #2 on: 17 / September / 2016, 10:39:28 »
Quote from: MaxxTT on 17 / September / 2016, 07:44:32
How can i realize the functionality to trigger the cam using my TX?
Using CHDK,  you can trigger your camera using it's USB port.  With CHDK running and the CHDK USB Remote functionality enabled. simply have your TX supply +5V to the USB ports power +5V power pin.  That will trigger a shot.

More info here :  CHDK USB Remote

Quote
Is there a tutorial?
There are a lot of tutorials.   :blink:  Some of them are accurate but many are not. Be aware that many are done by people with very little knowledge looking to create a quick Youtube video.

The official CHDK manual is here : CHDK User Manual

This page of links is also a good place to start (all the links point to accurate info):  CHDK Links.  Pay particular attention to this section - there is some good introductary stuff there :  Manuals and Documentation

And be sure to look at this if you are just anxious to get started : STICK Utility

Quote
I found some info including an arduino board, and other info which seemed to work WITHOUT Arduino (which i would prefer). Can somebody help please?

With CHDK script you can get more sophisticated.  Like this :  KAP UAV Exposure Control Script

edit :  genwire usb2 interface
« Last Edit: 17 / September / 2016, 10:42:34 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline MaxxTT

  • *
  • 4
Re: Quadrocopter and remote trigger using TX
« Reply #3 on: 17 / September / 2016, 10:45:14 »
Meanwhile i found some answers, mostly in the ardupilot tutorials.

But one big question i cannot solve: HOW TO INSTALL scripts?
I cant copy any script to any scripts directory cause i dont see them in windows ( i see only the chdk-system, a *.bin-file and some other). Within the camera, i see all directories but there i cant copy any scripts to the cam.

How to access the scripts-dir using windows?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Quadrocopter and remote trigger using TX
« Reply #4 on: 17 / September / 2016, 10:50:39 »
Quote from: MaxxTT on 17 / September / 2016, 10:45:14
But one big question i cannot solve: HOW TO INSTALL scripts?  I cant copy any script to any scripts directory cause i dont see them in windows ( i see only the chdk-system, a *.bin-file and some other). Within the camera, i see all directories but there i cant copy any scripts to the cam. How to access the scripts-dir using windows?
How did you setup your SD card?  Did you use STICK as I suggested?  Are you able to get CHDK to load and open the CHDK menus?

If your SD card is properly setup, the CHDK script folder path will be A/CHDK/SCRIPTS (i.e. the scripts folder is a sub-folder to the CHDK folder).


« Last Edit: 17 / September / 2016, 10:52:17 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline MaxxTT

  • *
  • 4
Re: Quadrocopter and remote trigger using TX
« Reply #5 on: 17 / September / 2016, 11:05:31 »
Solved. Needed to use WASP to switch partitions around.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Quadrocopter and remote trigger using TX
« Reply #6 on: 17 / September / 2016, 11:19:53 »
Quote from: MaxxTT on 17 / September / 2016, 11:05:31
Solved. Needed to use WASP to switch partitions around.
If you use an SD card that is 4G (or less) in size, you won't need to swap partitions as it will work with just one.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
Pages: [1]   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal