Can't enter in alt mode using Canon g15

reyalp

14118

Re: Can't enter in alt mode using Canon g15

« Reply #10 on: 10 / January / 2017, 02:24:45 »

Advertisements

Here's a test build for firmware 100e. The alt button still defaults to playback, but you should be able to set it to shortcut or erase (AF frame select)

When they are assigned as the alt key, the original canon functions of these buttons should only be triggered if you hold them down for ~half a second or more.

g15-100e-1.5.0-4752-full-reyalp-kbd-test-1.zip (817.85 kB - downloaded 25 times.)

Logged

Don't forget what the H stands for.

teallman

6

Re: Can't enter in alt mode using Canon g15

« Reply #11 on: 11 / January / 2017, 13:38:02 »

Quote from: reyalp on 10 / January / 2017, 02:24:45

Here's a test build for firmware 100e. The alt button still defaults to playback, but you should be able to set it to shortcut or erase (AF frame select)

When they are assigned as the alt key, the original canon functions of these buttons should only be triggered if you hold them down for ~half a second or more.

Works great.
I tried all of the available buttons and they all work. Defaulted to <Shortcut>.
Thanks a lot.

Logged

reyalp

14118

Re: Can't enter in alt mode using Canon g15

« Reply #12 on: 11 / January / 2017, 16:04:20 »

Quote from: teallman on 11 / January / 2017, 13:38:02

I tried all of the available buttons and they all work.

Thanks for testing.

Quote

Defaulted to <Shortcut>.

Hmm, I didn't expect this, but I guess it makes sense because aliased to print/shortcut before and that's what was in your config.

It would probably revert to playback if you reset your setting, but I was trying to leave it on playback so users wouldn't suddenly have the alt key changed when they update.

« Last Edit: 11 / January / 2017, 16:10:45 by reyalp »

Logged

Don't forget what the H stands for.

teallman

6

Re: Can't enter in alt mode using Canon g15

« Reply #13 on: 11 / January / 2017, 23:41:12 »

Quote

Thanks for testing.

No prob. Glad to help a bit.

Logged

reyalp

14118

Re: Can't enter in alt mode using Canon g15

« Reply #14 on: 11 / March / 2017, 16:39:09 »

I belatedly checked this in, autobuild 4761 and later for both trunk and stable.

I don't really like changing users existing key assignments, especially in the stable branch, but I didn't see a better way to deal with it.

Logged

Don't forget what the H stands for.