Powering EOS M3/M10 throught night time timelapse situations - page 3 - Hotwire! Hardware Mods, Accessories and Insights - CHDK Forum supplierdeeply
« previous next »
Pages: 1 2 [3] 4   Go Down

Powering EOS M3/M10 throught night time timelapse situations

  • 34 Replies
  • 23955 Views
*

Offline udo

  • ***
  • 123
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #20 on: 11 / March / 2017, 05:47:49 »
Advertisements
I Acquired a carrying case for the M3/M10 and the fake battery plus cable for the M3/M10.
Next I will get the batteries, case and charger for the 18650's.
Logged
*

Offline axman

  • ***
  • 145
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #21 on: 20 / June / 2017, 14:49:00 »
Hey guys, interesting topic, I also have the external power questions for my SX530HS and M10.  Having enough Amps is key, as many people have said.

Some sources for various Vregs below.  Hopefully the info is useful to your experiments.

For my ixus160 rig, I use this buck V reg:
https://www.dpcav.com/xcart/Adjustable-Voltage-Regulator-1-35V-SEPIC-Type.html
It is   3 - 35V input, adjustable output, 2A continuous
I give it input of 19V, and step down to 4.1V at fake battery.  Best camera results and reliability.

This buck Vreg seems to fit your requirements of 7.4V @ 4A as long as your battery pack is enough volts more than 7.4
https://www.pololu.com/product/2883
It is ?(9) ~ 40V input, 7.5V output, 15A
I have not used this one yet, but might be promising for M10.

If high amps AND different input/output voltages are required, as if many cams sharing a common power supply, you may be interested in this buck boost Vreg. 
http://www.mini-box.com/DCDC-USB-200
It is     6-34V input, 5-24V output, 15A continuous
In my rig, I give it input from 12V batteries and make 19V output. 

And this device is not a Vreg, but is useful in external battery configurations.  It switches between the highest of 2 input voltage sources to a common output.
http://www.mini-box.com/Y-PWR-Hot-Swap-Load-Sharing-Controller
With this, I can disconnect half of my batteries and rig continues to run.  The Intel NUC at receiving end does not notice the switch..

Anyway, hope the info is useful.  Looking forward to hearing more about your experiments!
Logged
*

Offline c_joerg

  • *****
  • 1240
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #22 on: 21 / June / 2017, 02:08:08 »
Interesting.
I still favor a solution with a power bank for all my cameras.
The operation of my S110 and SX50 is thus no problem, since they need 3.7V.

However, I did not have time to worry about it.
This is a transitional solution:
https://chdk.setepontos.com/index.php?topic=13164.0
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline c_joerg

  • *****
  • 1240
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #23 on: 21 / December / 2017, 04:20:28 »
I have now bought this adapter for my EOS M3
https://www.amazon.de/gp/product/B074CCFFCT/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It looks similar to this one in that post:
https://chdk.setepontos.com/index.php?topic=13056.msg131628#msg131628

I'm really positively surprised (even the size of the DC / DC). With the included USB power adapter (5V / 3A) everything works without problems. Also a time lapse test with 30 shots (interval 2s / RAW + JPG) went without problems. The voltage curve (measured in the camera about 8.3V) also showed no abnormalities.

Even with my first power bank with a 2.4A output went smoothly.

With a second power bank with 2.1A output, the camera could not be turned on via the main switch.
Interestingly, the power bank stayed on and did not switch off! If you would just hang a powerful DC / DC to the power bank, then the power bank would turn off at greater> 2.1A immediately. That was not the case here.
This DC / DC converter seems to recognize what he can expect from the power bank.

But what work for this power bank: Turn on in the playback mode and then switch to recording. Again, no abnormalities were seen during the time-lapse recordings.

I will now make a connection for my Canon G1x. The crucial question will be whether I can extend it then the lens.

@Ant
If I turn on the camera, then I do not need to confirm the external power supply. I've heard of other adapters that need do this.
I still do not understand why always have to confirm the replacement batteries. The replacement battery could behave as the DC-coupler.



« Last Edit: 21 / December / 2017, 04:22:15 by c_joerg »
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline udo

  • ***
  • 123
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #24 on: 21 / December / 2017, 09:06:11 »
Quote from: c_joerg on 21 / December / 2017, 04:20:28
I have now bought this adapter for my EOS M3
https://www.amazon.de/gp/product/B074CCFFCT/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Interesting option!
But: 2.4A powerbank? Is this a common standard?
Is the DC/DC converter efficient? (warm?)
Logged
*

Offline c_joerg

  • *****
  • 1240
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #25 on: 21 / December / 2017, 09:36:07 »
Quote from: udo on 21 / December / 2017, 09:06:11
But: 2.4A powerbank? Is this a common standard?
 

I have only 1 of 4 powerbanks which delivers 2.4A. All others have 2.1A

Quote from: udo on 21 / December / 2017, 09:06:11
Is the DC/DC converter efficient? (warm?)

It gets only a little bit warm.
I haven’t measured the current from M3 until now but I wouldn’t expect more than 0.4A in mean. The peaks are only short. So I think it’s not critical.

Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline udo

  • ***
  • 123
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #26 on: 21 / December / 2017, 10:27:37 »
Quote from: c_joerg on 21 / December / 2017, 09:36:07
Quote from: udo on 21 / December / 2017, 09:06:11
But: 2.4A powerbank? Is this a common standard?
 

I have only 1 of 4 powerbanks which delivers 2.4A. All others have 2.1A
A quick query on ebay.de with `2.4a powerbank` yields a few results...
Quote
Quote from: udo on 21 / December / 2017, 09:06:11
Is the DC/DC converter efficient? (warm?)

It gets only a little bit warm.
I haven’t measured the current from M3 until now but I wouldn’t expect more than 0.4A in mean. The peaks are only short. So I think it’s not critical.
Sounds interesting: less `non-standard` parts and more ease of (multi) use....
Thanks for posting this find!
Logged
*

Offline ju1234

  • **
  • 79
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #27 on: 09 / May / 2018, 19:11:53 »
If the originator of this thread still has not found an answer: I have used external power. 12 volt lead acid battery (gel) - step down converter (5Amp converter available at Ebay for $3) to step it down to 8.3V (the official Canon AC adapter output is 8.3). Use it with the dummy battery.
Logged
*

Offline c_joerg

  • *****
  • 1240
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #28 on: 10 / May / 2018, 02:32:36 »
Quote from: ju1234 on 09 / May / 2018, 19:11:53
12 volt lead acid battery (gel)

As long as you do not need to carry the battery, a lead gel battery is fine. Compared to a power bank, the energy density is very low. Oh, you get the battery bad in the plane.
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline c_joerg

  • *****
  • 1240
Re: Powering EOS M3/M10 throught night time timelapse situations
« Reply #29 on: 02 / March / 2019, 11:30:53 »
Another idea for a power supply. A powerbank with quick charge. With 2 diodes and 2 resistors you have to generate directly 9V / 2A. With that, the cameras are getting along well.
https://blog.oxplot.com/quickcharge/
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
Pages: 1 2 [3] 4   Go Up
« previous next »
 

Related Topics