ixus175_elph180_100c porting attempt - page 19 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 14 15 16 17 18 [19] 20 21   Go Down

ixus175_elph180_100c porting attempt

  • 201 Replies
  • 112860 Views
*

Offline reyalp

  • ******
  • 14131
Re: ixus175_elph180_100c porting attempt
« Reply #180 on: 21 / June / 2018, 22:39:38 »
Advertisements
Quote from: koshy on 21 / June / 2018, 18:04:28
Just in case it helps as I'm doing this a lot obviously.
I don't use zadig but rather the plain libUSB from https://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/
On windows 10, I would strongly recommend using zadig.

edit:
And FWIW, PTP works fine for me on elph180
Logged
Don't forget what the H stands for.
*

Offline jdstech

  • **
  • 52
Re: ixus175_elph180_100c porting attempt
« Reply #181 on: 26 / June / 2018, 14:55:57 »
Quote
If it goes black immediately when you plug in the USB, this has nothing to do with the "disable LCD off" option. It usually means something sent regular (non CHDK) PTP commands to the camera.

Right I forgot about that. Well in any case it works now, I have no clue why. I went to try it again today to see what the console output and it magically worked fine. I'm guessing the old drivers were still running when I tried to connect to it before and I just had to restart my computer to get them to leave me alone, but I could have sworn I tried a restart when it didn't work earlier; that's pretty much the first law of debugging.

Oh well, thanks for your work on this port!

Logged
*

Offline johaneste

  • *
  • 1
Re: ixus175_elph180_100c porting attempt
« Reply #182 on: 02 / July / 2018, 19:34:35 »
Hello, I have the ELPH 180 100c and the complete file did not work the MODULE files and the small file if it works but the SCRIPTS are bad; then in the small file I replace the SCRIPTS folder and it works perfectly in the camera.
I hope this helps someone.
regards
Logged
*

Offline reyalp

  • ******
  • 14131
Re: ixus175_elph180_100c porting attempt
« Reply #183 on: 02 / July / 2018, 22:30:49 »
Quote from: johaneste on 02 / July / 2018, 19:34:35
Hello, I have the ELPH 180 100c and the complete file did not work the MODULE files and the small file if it works but the SCRIPTS are bad; then in the small file I replace the SCRIPTS folder and it works perfectly in the camera.
This sounds like an installation problem, the "full" zip from the autobuild works fine for me. You should basically never use the small zip.
Logged
Don't forget what the H stands for.
*

Offline reyalp

  • ******
  • 14131
Re: ixus175_elph180_100c porting attempt
« Reply #184 on: 05 / July / 2018, 21:48:07 »
In autobuild 5064, I added a fix for ND overrides. Details https://chdk.setepontos.com/index.php?topic=13228.80
Logged
Don't forget what the H stands for.
*

Offline JP

  • *
  • 1
Re: ixus175_elph180_100c porting attempt
« Reply #185 on: 22 / August / 2018, 20:47:44 »
Which is the <alt> button in the elph180??
Logged
*

Offline reyalp

  • ******
  • 14131
Re: ixus175_elph180_100c porting attempt
« Reply #186 on: 23 / August / 2018, 01:29:02 »
Quote from: JP on 22 / August / 2018, 20:47:44
Which is the <alt> button in the elph180??
Default is playback
Logged
Don't forget what the H stands for.
*

Offline arsenix

  • *
  • 47
Re: ixus175_elph180_100c porting attempt
« Reply #187 on: 01 / September / 2018, 12:31:23 »
Can anyone using this camera comment on the stability of CHDK on the unit? I am considering switching to this camera as a newer alternative to the Digic4 stuff I have been using. Think precision sync (via battery 3rd wire) will work?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: ixus175_elph180_100c porting attempt
« Reply #188 on: 01 / September / 2018, 13:27:05 »
Quote from: arsenix on 01 / September / 2018, 12:31:23
Think precision sync (via battery 3rd wire) will work?
At the moment, there are only two cameras (sx200is, ixus120_sd940) with precision sync via battery 3rd wire enabled in the autobuild  using :

Code: [Select]
#define CAM_REMOTE_AtoD_CHANNEL   5       

If you have an ixus175_elph180, it would be easy to enable the feature and post a custom build that you could test.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline reyalp

  • ******
  • 14131
Re: ixus175_elph180_100c porting attempt
« Reply #189 on: 01 / September / 2018, 16:56:03 »
Quote from: waterwingz on 01 / September / 2018, 13:27:05
At the moment, there are only two cameras (sx200is, ixus120_sd940) with precision sync via battery 3rd wire enabled in the autobuild  using :
I added A/D support for all the lipo battery cameras I have in trunk  r5062, including elph180. So @arsenix should be able to just use the latest trunk.

Analog AV detect is also supported: https://chdk.setepontos.com/index.php?topic=13451.msg137584#msg137584
Logged
Don't forget what the H stands for.
Pages: 1 ... 14 15 16 17 18 [19] 20 21   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal