supplierdeeply

ixus175_elph180_100c porting attempt

  • 167 Replies
  • 17995 Views
*

Offline srsa_4c

  • ******
  • 3455
  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #50 on: 14 / April / 2017, 08:45:40 »
    Advertisements
    How to enable rec mode when usb connected?
    Try changing CAM_USB_EVENTID to 0x302 (From the physw_bits.txt dump, I have the impression that this has changed). It is defined in platform_camera.h.

  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #51 on: 14 / April / 2017, 12:44:08 »
    Just curious, how close is this to being usable?  Our school has a high altitude balloon project with two donated elph180 cameras but unfortunately they do not do time lapse/interval shooting.  So our hopes are pinned on this effort.  Launch window is 12-13 May 2017.

    I saw that the elph160 development is finished and I would be willing to trade a elph180 for a elph160 if anyone is willing.
    « Last Edit: 14 / April / 2017, 12:53:58 by wildbi111 »

  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #52 on: 14 / April / 2017, 13:31:49 »
    @srsa_4c Thank you. it's work again. :D sorry for my fool i never saw physw_bits.txt before. Every thing look like very complicate now. No impression 8)

    @wildbi111 kap.lua not fully test.  time lapse/interval shooting is worked but another feature like custom iso not test. Display can't turnoff while script running. On your own risk, after more test on kap.lua i will share it here.

    Thank.


    *

    Offline srsa_4c

    • ******
    • 3455
  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #53 on: 14 / April / 2017, 14:11:48 »
    i never saw physw_bits.txt before.
    The sigfinder (finsig_dryos) can produce this file, but it does not do that by default. It can be enabled by uncommenting the respective #define at the top of tools/finsig_dryos.c . You probably won't need this though.


  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #54 on: 14 / April / 2017, 16:46:45 »
    @tsamma - Thanks, I hope I hear from you soon regarding the results of the test.

  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #55 on: 14 / April / 2017, 21:55:35 »
    Just try this may be sufficient your requirement Aerial Photography. No RAW.
    ixus175_elph180-100c-1.5.0-r4759-full

    I'm try to enable TurnOffBackLight and TurnOnBackLight function to save power but not success. It's different from reference port.

    Goodluck. :)

    *

    Offline srsa_4c

    • ******
    • 3455
  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #56 on: 16 / April / 2017, 10:59:16 »
    I'm try to enable TurnOffBackLight and TurnOnBackLight function to save power but not success. It's different from reference port.
    These functions have been effectively removed from the firmware. That makes the set_backlight script command ineffective. The display can probably still be switched off/on with the set_lcd_display script command.

  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #57 on: 20 / April / 2017, 08:59:53 »
    Oh yes!!! thank srsa_4c for obsolete set_blacklight.

    Not much time to make a progress.
    I try to fullfill code_get.txt by ixus160 reference port. In filewrite.c may be have some mistake.  CHDKPTP can't remote shoot. It crash my ixus175 immediately.

    I can take a RAW with 29MB file size but it's only save RAW by quick press shootfull and not save RAW by shoothalf+shootfull. Is it normal.

    And try to turnoff LCD display by set_lcd_display. It's just turnoff LCD until next capture.
    Regards.


    *

    Offline reyalp

    • ******
    • 10701
  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #58 on: 20 / April / 2017, 12:29:59 »
    It's just turnoff LCD until next capture.
    This is normal if review is enabled in the canon firmware.
    Don't forget what the H stands for.

  • Publish
    Re: ixus175_elph180_100c porting attempt
    « Reply #59 on: 22 / April / 2017, 17:36:10 »

    @wildbi111 kap.lua not fully test.  time lapse/interval shooting is worked but another feature like custom iso not test. Display can't turnoff while script running. On your own risk, after more test on kap.lua i will share it here.


    Hi tsamma - So how are things going with your elph180 porting?  Just hoping that you will soon have something working. 

     

    Related Topics