what is this message means "attempted to close a non-present device bus-0******"

cdg

53

« on: 30 / April / 2017, 20:32:31 »

Advertisements

Hello there:
What is "attempted to close a non-present device bus-0:\\******" means ? This message [size=78%]sometime even come out with no camera turns on .[/size]
[/size][size=78%] and with this message come out sometime i still could control cameras （I have 8 cameras），sometime it's lose connection，then i need to reconnect all the cameras，but sometime fail again.[/size]
[/size]
[/size][size=78%]thanks for the help!!![/size]

Logged

reyalp

14118

Re: what is this message means "attempted to close a non-present device bus-0******"

« Reply #1 on: 30 / April / 2017, 20:52:14 »

It means that a camera chdkptp thought was connected was not connected when chdkptp exited.

You will see this if have chdkptp connected, you turn off the camera, and then immediately quit chdkptp without issuing any other commands. By itself, it doesn't indicate any specific problem, but you might see it if the camera had crashed.

Logged

Don't forget what the H stands for.

cdg

53

Re: what is this message means "attempted to close a non-present device bus-0******"

« Reply #2 on: 01 / May / 2017, 03:11:48 »

Quote from: reyalp on 30 / April / 2017, 20:52:14

It means that a camera chdkptp thought was connected was not connected when chdkptp exited.

You will see this if have chdkptp connected, you turn off the camera, and then immediately quit chdkptp without issuing any other commands. By itself, it doesn't indicate any specific problem, but you might see it if the camera had crashed.

Thank you ！
So i will ignore it.

Logged