Dealing with resonance of Ixus cameras image stabilization

lucamax

3

« on: 27 / March / 2017, 22:58:00 »

Advertisements

I have problems with the Image Stabilization system of a Ixus 240 camera.

The point is that even if the electro mechanical stabilization system (IS) , basically a lens held by some springs is disable, it still there and if the camera operates in a high vibrations environment it goes in resonance and shots are blur.

One solution would be to open the camera and glue it .

I wonder if another less crude solution would be to send a command to block it in a certain position .

I do not know if it would make a difference compared to disabling IS from Canon Menu.

Any suggestion is welcome !

P.s. My knowledge about Canon IS is equal to zero , I just suppose that the IS is a electro mechanical system similar to similar digital cameras.

« Last Edit: 27 / March / 2017, 23:00:01 by lucamax »

Logged

reyalp

14117

Re: Dealing with resonance of Ixus cameras image stabilization

« Reply #1 on: 28 / March / 2017, 00:44:16 »

I wouldn't expect there to be a way to lock it more than turning off in the menu. However, there are a lot of IS related evenprocs in the firmware, maybe one of them would be useful. You can find them by searching for IS in funcs_by_name.csv for your camera in the source.

An alternative might be to get one of the cheaper Ixus or A series that doesn't have hardware IS at all.

Logged

Don't forget what the H stands for.

waterwingz

12140

Re: Dealing with resonance of Ixus cameras image stabilization

« Reply #2 on: 28 / March / 2017, 03:22:55 »

Quote from: lucamax on 27 / March / 2017, 22:58:00

The point is that even if the electro mechanical stabilization system (IS) , basically a lens held by some springs is disable, it still there and if the camera operates in a high vibrations environment it goes in resonance and shots are blur.

There is a long discussion about this issue here : DIY Drones : Let's Talk Canon Cameras. It points out (as you suggest) that the lens is "literally floating". So turning off IS does not help as the lens vibrates regardless and there is no mechanical way to "lock" it into one position.

Logged

Ported : A1200 SD940 G10 Powershot N G16

lucamax

3

Re: Dealing with resonance of Ixus cameras image stabilization

« Reply #3 on: 01 / April / 2017, 00:25:46 »

I receive yesterday a Ixus 160 and I confirm that with no hardware IS the problem disappear .

I made comparative video test with a S110 and a Ixus 240 , both cameras in the same shooting conditions of the 160 showed the classical rolling shutter issue when in full daylight and vibrations when cloudy or low light conditions.

The problem with the 160 are poor specs , i.e. video is not Full HD but only 720P and even with 20 mpixel , images are not really great .

reyalp, I will check if the IS evenprocs could solve the problem

waterwingz, thanks for the link .

Logged