peek 0x146a0ixus190_elph200-100d-CHDK_DE-1.6.0-5937A/DCIM/107___060x005c007d,0x005c007d:---=----=--+-=----=----0750 0x005c003d 0x40600 0x005c00fd 0x80640 0x005c00bd 0xc0680 0x005c003d 0x40940 0x005c00fd 0x800 0x005c003d 0x4060 0x005c00fd 0x80100 0x005c003d 0x40160 0x005c003d 0x40220 0x005c00fd 0x80310 0x005c00bd 0xc0370 0x005c00bd 0xc0
[ 2]PS1: 0420 no zoom 0020 <|<< 0400 >|>>PS2: [ 6] is changing during optical zooming <> or <<>>, stops at the edge or digital zoom.vals= 0420,0400,0020 or 0000.
Code: [Select] [ 2]PS1: 0420 no zoom 0020 <|<< 0400 >|>>This is a never-ending story What does that mean?Is it a slow or fast zoom speed or is the same bit changed for both speeds? For one change you used the same characters, which you used before for different speeds.These changes show already known values: Ove promjene pokazuju već poznate vrijednosti: { 0, KEY_ZOOM_IN ,0x00000200 }, { 0, KEY_ZOOM_OUT ,0x00000400 }, We still don't know the values for other zoom speed.Each digit in the line represents one bit. In theory, when you press a key one bit changes its state. It can be that some of the speeds change more than one bit. This means that while holding down the key, multiple digits can be changed at the same time. When you release the key, the changed digits should be return to the initial value. Code: [Select]PS2: [ 6] is changing during optical zooming <> or <<>>, stops at the edge or digital zoom.vals= 0420,0400,0020 or 0000.As I wrote before, the changed bit must keep the same state all the time while the key is pressed. If this is not the case, then probably these changes represent something else.
[ 2]PS1: 0420 no zoom 0020 <|<< 0400 >|>>
PS2: [ 6] is changing during optical zooming <> or <<>>, stops at the edge or digital zoom.vals= 0420,0400,0020 or 0000.
The only IXus I saw so far with double defined zoomkeys is ixus1000_sd4500.There the zoomlever is quite massive and the two speeds are visible...
Looks like a single zoomlever, no change visible (anyw)here >,>> || <,<<.
I have "something" for that camera but only for the firmware version 100d.The port is completely untested, I don't know if it works or not, I didn't really waste too much time on it.
Quote from: blackhole on 03 / May / 2020, 11:28:04I have "something" for that camera but only for the firmware version 100d. "Something" works...
I have "something" for that camera but only for the firmware version 100d.
Started by akira « 1 2 ... 13 14 » DryOS Development
Started by adong « 1 2 ... 49 50 » DryOS Development
Started by makomk « 1 2 » DryOS Development
Started by alvm Firmware Dumping