error: could not start the cameras - last time I use chdk+ttc was everything ok - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

error: could not start the cameras - last time I use chdk+ttc was everything ok

  • 2 Replies
  • 3269 Views
*

Offline bartek158

  • *
  • 4
error: could not start the cameras - last time I use chdk+ttc was everything ok
« on: 30 / August / 2018, 02:12:57 »
Advertisements
Hello
I have strange problem with my book scanner. I last use it about 8 weeks ago and everything was ok. Today when I try to connect to cameras with TTC+CHDK there is a problem : "error: could not start the cameras". I don't instal nothing on this laptop during last few months - I use it only for scanning. I turn on cameras without problems, windows make sound that new devices is connected, windows see my both Canon A2500. I use windowsw 10 64bit ,
It is second time that after long break with using TTC I have this problem , last time I reinstall everyting (chdk on cameras, libusb,ttc ) and it solve the problem. But it take a lot of time to reinstal everything befor scanning.
It is possible that for example Avast block some drivers ?
Have somebody any sugestion
« Last Edit: 30 / August / 2018, 02:18:50 by bartek158 »
Logged
*

Offline c_joerg

  • *****
  • 1251
Re: error: could not start the cameras - last time I use chdk+ttc was everything ok
« Reply #1 on: 30 / August / 2018, 05:40:13 »
Have you ever tried to reinstall CHDK only on the camera?
I have had the problem twice in recent years that CHDK on the SD card is no longer running. But I suspect that it was caused by errors on the SD card. It was the same SD Card. You could try a different SD Card

That's why I always have a copy on my computer.
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline reyalp

  • ******
  • 14128
Re: error: could not start the cameras - last time I use chdk+ttc was everything ok
« Reply #2 on: 31 / August / 2018, 03:49:26 »
Quote from: bartek158 on 30 / August / 2018, 02:12:57
I use windowsw 10 64bit ,
The major windows 10 updates (creators update etc) seem to remove libusb drivers. If this is what happened, you just need to re-install the libusb driver with zadig.
Logged
Don't forget what the H stands for.
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal