Most reliable held-power-button solution - Hotwire! Hardware Mods, Accessories and Insights - CHDK Forum
« previous next »
Pages: [1]   Go Down

Most reliable held-power-button solution

  • 6 Replies
  • 5033 Views
*

Offline Sdack

  • ***
  • 195
Most reliable held-power-button solution
« on: 28 / October / 2017, 21:53:11 »
Advertisements
Hi folks,
I am trying to relocate an image I found weeks ago, while perusing a thread here, which showed a neat plastic clip with a threaded bolt which could be carefully arranged to hold the power button down.

If anyone can point me to the image or thread in question, or suggest other reliable solutions for holding the power button permanently, and preferably without damaging the function of the camera, I'd appreciate it.

I've seen a few posts referring to stuck buttons and odd behaviour after long periods with held buttons and I hope to avoid having to post one myself.
Cheers
Sdack
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Most reliable held-power-button solution
« Reply #1 on: 29 / October / 2017, 13:10:18 »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Sdack

  • ***
  • 195
Re: Most reliable held-power-button solution
« Reply #2 on: 29 / October / 2017, 16:00:22 »
Perfect, ta!
I really like the threaded screw part.
I guess threading plastic is a lot easier than metal.  Might be abl to do it with a metal bolt with the same thread as the plastic one, instead of buying a die.
Sdack
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Most reliable held-power-button solution
« Reply #3 on: 29 / October / 2017, 17:03:08 »
Quote from: Sdack on 29 / October / 2017, 16:00:22
I really like the threaded screw part. I guess threading plastic is a lot easier than metal.  Might be able to do it with a metal bolt with the same thread as the plastic one, instead of buying a die.
I'd be tempted to fiddle with an elastic band and some sort of small shim.  Epoxy glue or use a double sided foam tape to attach a small machine screw bolt to the power button to raise it a bit and use the elastic band to hold it down.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Sdack

  • ***
  • 195
Re: Most reliable held-power-button solution
« Reply #4 on: 29 / October / 2017, 19:53:06 »
While l adore the low-tec appeal, I wouldn't feel comfortable trusting elastic, especially with the wide temperature range we get here in Australia. 

The plastic clip element in the photo above looks like it might quite easily pop off, so I might see if I can figure out a more whole-camera-enclosing way to support the screw.

Will post pics when and if I manage to get it working
Sdack
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Most reliable held-power-button solution
« Reply #5 on: 30 / October / 2017, 09:42:29 »
Quote from: Sdack on 29 / October / 2017, 19:53:06
While l adore the low-tec appeal, I wouldn't feel comfortable trusting elastic, especially with the wide temperature range we get here in Australia. The plastic clip element in the photo above looks like it might quite easily pop off, so I might see if I can figure out a more whole-camera-enclosing way to support the screw.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Sdack

  • ***
  • 195
Re: Most reliable held-power-button solution
« Reply #6 on: 30 / October / 2017, 19:25:10 »
LOL,

I was thinking something a little more more robust..

« Last Edit: 30 / October / 2017, 19:54:50 by Sdack »
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal