JPEG setting not available in menu, build 1.4.1-4976 on A480/A490 - page 2 - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: 1 [2]   Go Down

JPEG setting not available in menu, build 1.4.1-4976 on A480/A490

  • 13 Replies
  • 5118 Views
*

Offline Mlapse

  • *****
  • 584
  • S95 S110
Re: JPEG setting not available in menu, build 1.4.1-4976 on A480/A490
« Reply #10 on: 31 / January / 2018, 04:30:26 »
Advertisements
You did it!
Thank you very much, this should be included in the next stable release.   
 
I've tested both the a480 & a490.
The jpeg setting is available and works.
It deliveres slightly larger files than my s95 in superfine. (4MB VS 3.5MB)

to show the quality difference I included an long distance shot in poor weather (Iso400 f/5.6 1/250sec)
That always helps me to spot noise. Although night shots do that better

« Last Edit: 03 / February / 2018, 08:14:41 by Mlapse »
Logged
frustration is a key ingredient in progress
*

Offline Mlapse

  • *****
  • 584
  • S95 S110
Re: JPEG setting not available in menu, build 1.4.1-4976 on A480/A490
« Reply #11 on: 31 / January / 2018, 04:53:16 »
If I can test anything else on these camera's, just let me know.
« Last Edit: 31 / January / 2018, 07:36:26 by Mlapse »
Logged
frustration is a key ingredient in progress
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: JPEG setting not available in menu, build 1.4.1-4976 on A480/A490
« Reply #12 on: 31 / January / 2018, 08:40:25 »
Quote from: Mlapse on 31 / January / 2018, 04:53:16
If I can test anything else on these camera's, just let me know.
Thanks for the offer.  These ports have been available for quite some time and can be considered stable so no specific testing is still required.  Please enjoy CHDK and report back anything strange or not working that you notice during your normal use.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Mlapse

  • *****
  • 584
  • S95 S110
Re: JPEG setting not available in menu, build 1.4.1-4976 on A480/A490
« Reply #13 on: 31 / January / 2018, 09:15:05 »
Thanks again Waterwingz and msl for your work, much appreciated.

what i do think is amazing is that I now see the canon superfine logo next to the L in the corner when the camera boots up in CHDK, last time I saw that logo was on my ixus v2.
i can't choose that in the menu, but it is in the system. It is no longer visible when the camera is in operation, when the fine logo is positioned above the L
 
And I can report strange behaviour, some settings come to mind..on the other hand I usually just dismiss it as incapabilitys of me or the models I use.
Or maybe just designchoices.

Like something with the infinity settings not holding on restart of the camera or that the camera shuts down if a script uses the reboot function. reboot is working in 1.4.1, I was mistakenly thinking about the 1.3.0 I used before. 
 
« Last Edit: 02 / February / 2018, 08:18:10 by Mlapse »
Logged
frustration is a key ingredient in progress
Pages: 1 [2]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal