QuoteDo you have chdk installed on your cameraNo. Quotedo you need a test version?Yes, that would be nice.
Do you have chdk installed on your camera
do you need a test version?
I also have a SX610 HS and would be willing to help with debugging/testing. I believe I have firmware 100a, and I had CHDK compiling at one point too, if that helps.
Im sure i have the 100a firmware.. checked with exiftoolhttps://drive.google.com/file/d/1dmS3mXP3Wpr8EnFYwOeuTMvxe8mFYkcB/view?usp=sharing
Quote from: eca on 06 / April / 2018, 17:36:28I also have a SX610 HS and would be willing to help with debugging/testing. I believe I have firmware 100a, and I had CHDK compiling at one point too, if that helps.I sent you a download link.Do not use it before you are sure the camera has firmware 100a.As far as I know, vers.req does not help to identify the firmware version.
Zebra appears to be working! When I enable it, I see stripes on overexposed things when the shutter is pushed half way down.
One issue - in <ALT> mode, the Shortcuts menu pops up every second or so.
If there is anything else you need, just let me know. We seem to be in different time zones, so feel free to send a list of things to try if you think that would be helpful.
FWIW, this port current has neither iris nor ND defined.I believe it is ND only. It has task_Nd + NdActuator.c and not task_IrisEvent + IrisActuator.c
Perfect that fixed the ND problem, I also managed to get my SD card to boot, it was because the card was formatted in exFat, and there was no option to format to fat32 in the normal windows formatting tool, so I had to use the EaseUS Partition Master, in order to format it as fat32 and now it works fine.
Started by Bernd R « 1 2 ... 44 45 » DryOS Development
Started by pratikpawar « 1 2 ... 12 13 » DryOS Development
Started by Qanthelas « 1 2 ... 27 28 » DryOS Development
Started by rmackay9 « 1 2 ... 11 12 » DryOS Development
Started by jim_blind CHDK Releases