installing chdk - General Discussion and Assistance - CHDK Forum supplierdeeply

installing chdk

  • 11 Replies
  • 4800 Views
installing chdk
« on: 20 / February / 2018, 03:16:31 »
Advertisements
http://www.instructables.com/id/How-To-Install-CHDK/ i used this instructions to install chdk , but i could not install , cause this instruction is about how install chdk via firmware update method , how can i install chdk with different method , i could not find instructions.

Re: installing chdk
« Reply #1 on: 20 / February / 2018, 03:26:26 »
http://chdk.wikia.com/wiki/Prepare_your_SD_card

Hint :  use one of the two utilities lists in the blue box at the top of that page.
Ported :   A1200    SD940   G10    Powershot N    G16

Re: installing chdk
« Reply #2 on: 21 / February / 2018, 14:28:00 »
i tried install and it s worse shutter button is not working and also it shows that card has no space what is happening? i only done what was in instructions   :'( i have used Using EOSCard to make the SD card bootable. this method http://chdk.wikia.com/wiki/Prepare_your_SD_card
and nor chdk , nor shutter button , and shows insufficient space on  card, everything  is worse, what should i do ? what is happening?   :( :( :( :( :( :( :( :( :( :( :( :( :'( ???

Re: installing chdk
« Reply #3 on: 21 / February / 2018, 14:38:04 »
what is happening?  :'( what should i do?  :-[


*

Offline srsa_4c

  • ******
  • 4451
Re: installing chdk
« Reply #4 on: 21 / February / 2018, 14:43:08 »
what is happening?  :'( what should i do?  :-[
Use STICK or CHIMP to install.
You probably have one of the newer Powershots, and your card somehow got partitioned. Re-format the card in camera (card must be unlocked) before you try installing again.

Re: installing chdk
« Reply #5 on: 21 / February / 2018, 15:10:35 »
and whats wrong with shutter button and memory card? everything is erased and shows , that tehre is isufficient space on card  :o

*

Offline srsa_4c

  • ******
  • 4451
Re: installing chdk
« Reply #6 on: 21 / February / 2018, 16:20:17 »
and whats wrong with shutter button and memory card? everything is erased and shows , that tehre is isufficient space on card  :o
As far as I know, formatting the card in camera should remove any existing partitions from the card and format a card with a single big partition.
You could perhaps share some details, such as
- which camera model do you have
- what size is that card
- the card size shown in the camera's format menu

If the camera thinks there's no space on the card, it won't let you take pictures (that's probably what's "wrong" with the shutter button).

*

Offline srsa_4c

  • ******
  • 4451
Re: installing chdk
« Reply #7 on: 21 / February / 2018, 17:02:27 »
From PM
camera is canon powershoot sx 60 hs with 8 gb memory card
Okay. I can only say that you should bring the card into shape (re-format it so it has a single 8GB partition) and then use either STICK or CHIMP.


Re: installing chdk
« Reply #8 on: 22 / February / 2018, 02:31:24 »
How can i reformat? Whats gone wrong? Why happened this ?  :-[

Re: installing chdk
« Reply #9 on: 22 / February / 2018, 07:46:10 »
what should i do?  ???

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal