Continuous shots in Motion Detection mode - page 2 - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: 1 [2]   Go Down

Continuous shots in Motion Detection mode

  • 14 Replies
  • 11600 Views
*

Offline vine

  • ***
  • 124
  • A560
    • my chdk page
Re: Continuous shots in Motion Detection mode
« Reply #10 on: 12 / May / 2008, 12:19:05 »
Advertisements
Quote from: Pauls9 on 12 / May / 2008, 09:56:33
Or I guess you could use a slightly longer exposure and have several discharges superimposed...?
Yes of course. In fact before there was reliable and fast enough motion detection people just used series of images with very long exposure times to capture their lightning.
Logged
my photo map

my chdk page with tutorials, scripts and more

>> finally back from vacation (was a bit longer than intended) <<
*

Offline fudgey

  • *****
  • 1705
  • a570is
Re: Continuous shots in Motion Detection mode
« Reply #11 on: 12 / May / 2008, 14:16:55 »
Yep, there's no known way of getting more burst speed out of these cameras unless you use the video/movie mode. The latest version of my MD script works in video mode as well (as long as you use the latest version deeper in the thread :)), so if you don't mind the bad resolution and the exposure turns out good, it maybe worth a try. My a570is can go 640x480 in 30 fps and half resolution in 60 fps, that's a whole lot more than the slightly more than 1 fps in burst mode...
Logged
*

Offline vine

  • ***
  • 124
  • A560
    • my chdk page
Re: Continuous shots in Motion Detection mode
« Reply #12 on: 13 / May / 2008, 02:00:53 »

(not taken by me obviously ;) )
Logged
my photo map

my chdk page with tutorials, scripts and more

>> finally back from vacation (was a bit longer than intended) <<
*

Offline SuperSized

  • *
  • 13
Re: Continuous shots in Motion Detection mode
« Reply #13 on: 20 / May / 2008, 06:24:29 »
Quote from: fudgey on 12 / May / 2008, 14:16:55
Yep, there's no known way of getting more burst speed out of these cameras unless you use the video/movie mode. The latest version of my MD script works in video mode as well (as long as you use the latest version deeper in the thread :)), so if you don't mind the bad resolution and the exposure turns out good, it maybe worth a try. My a570is can go 640x480 in 30 fps and half resolution in 60 fps, that's a whole lot more than the slightly more than 1 fps in burst mode...

Could you point me in the direction of the thread? Thanks
Logged
*

Offline fudgey

  • *****
  • 1705
  • a570is
Re: Continuous shots in Motion Detection mode
« Reply #14 on: 20 / May / 2008, 12:58:25 »
Logged
Pages: 1 [2]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal