Quick patch attached for osd. Seems to work.
I'm not sure if gps and usermenu need any? What happens if a user menu has items that don't exist on the current platform?
Can't say much to GPS as I'm not familiar with it.
I added cam specific items to the user menu on an s3is, copied the cfg to my sx280. The user menu showed up as empty there. I don't know what's going on behind the scenes, though.
Here's an updated patch that skips over user menu items that aren't valid for the current platform. It seems to work, but I'm not very familiar with the user menu code.
Loaded patched CHDK to the 2 cams I mentioned previously. Added cam-specific and common menu entries and some modules to user menu, then copied the file to the other cam. The resulting behaviour was messy (disappeared entry reappearing while editing, etc.).
I did not update any modules on the cards, don't know if that has any significance.
How were you copying the CFGs to the card?
QuoteHow were you copying the CFGs to the card?With USB connected, switched cam on, used chdkptp gui to upload that single file, hit disconnect button, switched cam off. I would assume the config in RAM isn't likely to get saved to file when I don't use the CHDK menu.
Before it gets forgotten, I'd vote for committing the patch - without the user menu related parts for now.
Started by PhyrePhoX « 1 2 » General Discussion and Assistance
Started by eheil General Help and Assistance on using CHDK stable releases
Started by outslider Archived Issues
Started by pshotuser General Help and Assistance on using CHDK stable releases
Started by shinnen General Help and Assistance on using CHDK stable releases