use chdk - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

use chdk

  • 4 Replies
  • 3318 Views
*

Offline tuli

  • *
  • 3
use chdk
« on: 27 / June / 2018, 03:28:24 »
Advertisements
Hello,
i'm new to this forum and trying to understand how to use CHDK.
in the bootable option is said that the SD card should be in the lock position in order for the camera to boot.
where my pictures are going to be stored?
Should i change the boot SD with new card after the boot, while the camera is on?
what happens to the CHDK after the camera is going to sleep? should I boot again?
Thanks for your kind help/
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: use chdk
« Reply #1 on: 27 / June / 2018, 06:19:25 »
Quote from: tuli on 27 / June / 2018, 03:28:24
where my pictures are going to be stored?
Your pictures are stored on your SD card in the same folders as they were previously stored.  The lock switch on the SD card is not a physical lock - it just indicates to the camera software that the card should not be written to.  CHDK bypasses that software check and allows the camera to write to the card normally.

Quote
Should i change the boot SD with new card after the boot, while the camera is on?
No.  Not only will that not work, it's not necessary. See my answer to your first question.

Quote
what happens to the CHDK after the camera is going to sleep? should I boot again?
After the camera is turned off, CHDK dissappears from the camera memory.  It has to be reloaded each time you start the camera.  If you use the SD card lock booting method, that happens automatically.  If you use the Firmware Update booting method, you need to perform the loading steps each time you start your camera.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline tuli

  • *
  • 3
Re: use chdk
« Reply #2 on: 27 / June / 2018, 08:55:30 »
Dear waterwingz,
Thanks a lot for your detailed response,
one last detail, once the camera goes on sleep mode, is CHDK erased or stay in memory when I press half way the release button?
Regards
Naftali
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: use chdk
« Reply #3 on: 27 / June / 2018, 09:18:21 »
Quote from: tuli on 27 / June / 2018, 08:55:30
one last detail, once the camera goes on sleep mode, is CHDK erased or stay in memory when I press half way the release button?
CHDK stays is memory until you actually turn the power off.  Sleep mode (i.e. the LCD display turns off and the lens retracts) do not erase CHDK from memory.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline tuli

  • *
  • 3
Re: use chdk
« Reply #4 on: 27 / June / 2018, 09:30:25 »
Dear waterwingz,
Thanks again for your fast and helpful response.
regards
 
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal