Start the cam in playback mode and press SET.The cam should do the following:- display Init at the top of the screen - this text will change later- switch to rec mode- take 3 shots (this will only succeed if there is nothing preventing the cam from shooting)
I've created both files to the root of the SD, do I need to have SCRIPT in the boot sector?
How do you start the camera directly in playback mode? ...mine start automatically in record
If anyone wants to try: the address in the CreateTask call needs to be adapted to each camera and firmware version. Post here (your camera model and its fw version) if you're unsure.
For this cam, use the following extend.m script:
How can I find the address for my G1x 100e or M3 101a?
With the correct address I should be also work on G1x and M3?
Is the Canon basic independent if the cam has a powershot or EOS firmware?
It looks like the Canon at the M50 has gone back to an EOS firmware ...
Probably, but I did not check. Button events might differ, but I don't think that's likely.
AFAIK real EOS cameras don't have Canon Basic.
The card needs to be setup to run scripts (so yes, you need the string in boot sector and the script.req file): http://chdk.wikia.com/wiki/Canon_Basic/Card_Setup
Start the cam with the playback button (the one at the bottom with the arrow).
The M6 has a rocker power switch, that's why I've asked... :-)
I've tried to hold the play button and then rock the switch to on but nothing happen when I press the SET button
I missed that detail. But, somehow, M5 and M6 users were able to run scripts - for example, here.
Started by Dodgey99
Started by VALKYRIE
Started by reyalp
« 1 2 ... 6 7 »
General Discussion and Assistance
Started by praveen_sb
Started by j