Quote from: c_joerg on 16 / October / 2021, 04:40:05Quote from: Caefix on 12 / October / 2021, 13:36:18On N,N2 LCDMsg_SetStr is same color in play & rec mode.On M100 and G9xII never seen in play mode…The colors vary from cam to cam. 19 is a green on M100, N2. The upperst line could be overwritten by Canon OSD.
Quote from: Caefix on 12 / October / 2021, 13:36:18On N,N2 LCDMsg_SetStr is same color in play & rec mode.On M100 and G9xII never seen in play mode…
On N,N2 LCDMsg_SetStr is same color in play & rec mode.
If there is no picture on the SD card at all, then ...
Quote from: srsa_4c on 03 / September / 2021, 15:10:04In short: make sure you don't use a Canon Basic script and CHDK at the same time.
In short: make sure you don't use a Canon Basic script and CHDK at the same time.
// Camera info:// DRYOS R54 (DRYOS version 2.3, release #0054+p3)// Firmware Ver GM1.00F // Found @ 0xff0a50f4, "GM1.00F" @ 0xff0a5101// Firmware build timestamp: Jul 14 2014 08:40:45// Canon PowerShot SX600 HS// PLATFORMID = 12934# (0x3286) Found @ 0xfff40040// Port's propset (7) may be set incorrectly
public sub get_zoom(buf)' tmp = lens_get_zoom_point() ==> ASSERT!! EvntProc.c Line 222' tmp = GetZoomLensCurrentPoint() *buf = tmpend sub
*set = 0x0000085E:PressSetButton system.create w/o () dim x=1 -- Lua comment call_event_proc('GetCameraInformationData') ' is comment, not string.This together gives a loong beep if bug in LoadScript(CAM) before Script.c Assert...public sub camspec_init() BeepDrive(3) ' Loaded fine beep.'end sub
Is it possible to set underwater white balance with a Canon Basic Script?
SX730 (dry 59p4) uses propset 12, where WB_MODE is 284, and the available values are:0 = Auto, 1 = Daylight, 3 = Cloudy, 4 = Tungsten, 5 = Fluorescent, 6 = Fluorescent H, 9 = Customset_prop(284,11) on sx730 crashes the cam
It's different with white balance underwater. I get values between 8500 and 14000K. The values are then depth dependent. So the underwater white balance seems to be a special automatic white balance.
A manual white balance is not possible with my underwater housing.
Started by Dodgey99
Started by VALKYRIE
Started by reyalp
« 1 2 ... 6 7 »
General Discussion and Assistance
Started by praveen_sb
Started by j