A590 + MDFB 2013 v1.1a = no flash - Script Writing - CHDK Forum
« previous next »
Pages: [1]   Go Down

A590 + MDFB 2013 v1.1a = no flash

  • 5 Replies
  • 5449 Views
*

Geezer

A590 + MDFB 2013 v1.1a = no flash
« on: 17 / September / 2018, 15:11:52 »
Advertisements
I can't get the flash to operate in most scripts.  It works normally outside <ALT>.


I tried two CHDK versions, 1.4.1 5097 and an earlier 1.4.1.  You know the four scripts that come with CHDK?  The flash works with the HDR script but none of the others.  Also doesn't work with MDFB.


I tried "always flash" and "auto flash" without success.  I also tried to override the flash in Enhanced Photo Operations / Auto Flash + & Manual Flash +.


I am sure the flash used to work in the MDFB script but I have not tried to use it (the flash) in the script for a couple years.


Help if you can,
Thanks,


Terry
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: A590 + MDFB 2013 v1.1a = no flash
« Reply #1 on: 17 / September / 2018, 16:17:12 »
Quote from: Geezer on 17 / September / 2018, 15:11:52
I am sure the flash used to work in the MDFB script but I have not tried to use it (the flash) in the script for a couple years.
The MDFB script has the following line:
Code: [Select]
set_prop(props.FLASH_MODE, 2)     -- flash off As the note says, this disables flash. Try removing that line from the script and set your desired flash mode on the Canon user interface.
Logged
*

Geezer

Re: A590 + MDFB 2013 v1.1a = no flash
« Reply #2 on: 18 / September / 2018, 09:22:37 »
Bingo!!!  I mimicked what appears to be the "rem" command and placed a couple dashes and a space in front of that line.  Flash now flashes.

Many, many thanks for the quick reply.

One more question - how do I load / run CHDK without loading any script?  Just use the camera normally with CHDK loaded.
Logged
*

Offline reyalp

  • ******
  • 14140
Re: A590 + MDFB 2013 v1.1a = no flash
« Reply #3 on: 18 / September / 2018, 12:52:30 »
Quote from: Geezer on 18 / September / 2018, 09:22:37
One more question - how do I load / run CHDK without loading any script?  Just use the camera normally with CHDK loaded.
The script tittle shown in the OSD just shows you which script you have selected. It doesn't have any effect unless you press shoot while in alt mode. There is no way to not have a script selected.

If you want to shoot normally, just leave alt mode. Any CHDK overrides you set in the menu will still be in effect.
Logged
Don't forget what the H stands for.
*

Geezer

Re: A590 + MDFB 2013 v1.1a = no flash
« Reply #4 on: 19 / September / 2018, 03:11:31 »
"Any CHDK overrides you set in the menu will still be in effect."
[/size]
[/size]You answered my question.

[/size]Thanks again for the help.

[/size]Terry
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: A590 + MDFB 2013 v1.1a = no flash
« Reply #5 on: 19 / September / 2018, 09:28:20 »
Quote from: Geezer on 19 / September / 2018, 03:11:31
"Any CHDK overrides you set in the menu will still be in effect."
You answered my question
Thanks again for the help.
Terry
Post edited - I can't read 3px high fonts   :haha
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal