SX430 - This will be my first porting Attempt - page 5 - DryOS Development

ntstatic

246

Re: SX430 - This will be my first porting Attempt

« Reply #40 on: 07 / November / 2018, 11:34:36 »

Advertisements

tried recompiling with Disable Compat_Check
and the camera still freezes instantly

Logged

blackhole

942
A590IS 101b

Re: SX430 - This will be my first porting Attempt

« Reply #41 on: 07 / November / 2018, 11:38:20 »

Quote from: ntstatic on 07 / November / 2018, 11:25:49

the AF LED ...
turns on
turns off

and then the camera hangs....

so thats ok

Great, here is another blink in boot.c

sx430is-100b-AF_LED-blinker-boot.zip (713.69 kB - downloaded 26 times.)

Logged

http://astrofoto.pondi.hr

ntstatic

246

Re: SX430 - This will be my first porting Attempt

« Reply #42 on: 07 / November / 2018, 12:29:45 »

Quote from: blackhole on 07 / November / 2018, 11:38:20

Quote from: ntstatic on 07 / November / 2018, 11:25:49
the AF LED ...
turns on
turns off

and then the camera hangs....

so thats ok
Great, here is another blink in boot.c

apparently does the same

The AF LED Turns on , Turns Off, the camera hangs.

Logged

blackhole

942
A590IS 101b

Re: SX430 - This will be my first porting Attempt

« Reply #43 on: 07 / November / 2018, 13:14:16 »

If you do not see the second blink, the camera dies before boot.c
You can try to comment out "MOV R0, # 1 \ n" in loader / main.c
Or wait for some advice from more experienced people.

Logged

http://astrofoto.pondi.hr

ntstatic

246

Re: SX430 - This will be my first porting Attempt

« Reply #44 on: 07 / November / 2018, 14:31:24 »

Code: [Select]

        //"    LDR     R0, =sub_FF020000 \n" 
        "    MOV     R0, %0\n"              // new jump-vector
        "    BLX     R0 \n"
//        "    MOV     R0, #1 \n"        
        //"    LDMFD   SP!, {R4,LR} \n"  
         : : "r"(MEMISOSTART) : "memory","r0","r1","r2","r3","r4"
        );

tried removing MOV R0,#1

still the same

Logged

srsa_4c

4451

Re: SX430 - This will be my first porting Attempt

« Reply #45 on: 07 / November / 2018, 17:25:06 »

Quote from: blackhole on 07 / November / 2018, 13:14:16

If you do not see the second blink, the camera dies before boot.c

Can you attach the source that changed since the latest published source zip?

Logged

blackhole

942
A590IS 101b

Re: SX430 - This will be my first porting Attempt

« Reply #46 on: 07 / November / 2018, 18:37:34 »

Quote from: srsa_4c on 07 / November / 2018, 17:25:06

Can you attach the source that changed since the latest published source zip?

Here you go.

main.c (1.54 kB - downloaded 29 times.)

boot.c (16.5 kB - downloaded 26 times.)

Logged

http://astrofoto.pondi.hr

srsa_4c

4451

Re: SX430 - This will be my first porting Attempt

« Reply #47 on: 07 / November / 2018, 19:19:08 »

Quote from: blackhole on 07 / November / 2018, 18:37:34

Here you go.

Thanks.
In code_gen, move the CHDK_NOT_IN_CANON_HEAP related modification block of boot.c down so it replaces this (0x2B9464 is MEMISOSTART):
LDR R0, =0x2B9464

Logged

blackhole

942
A590IS 101b

Re: SX430 - This will be my first porting Attempt

« Reply #48 on: 07 / November / 2018, 19:52:59 »

Quote from: srsa_4c on 07 / November / 2018, 19:19:08

Thanks.
In code_gen, move the CHDK_NOT_IN_CANON_HEAP related modification block of boot.c down so it replaces this (0x2B9464 is MEMISOSTART):
LDR R0, =0x2B9464

Thanks again!
Test build is attached.

sx430is-100b-1.5.0-5113-full.zip (713.61 kB - downloaded 39 times.)

Logged

http://astrofoto.pondi.hr

ntstatic

246

Re: SX430 - This will be my first porting Attempt

« Reply #49 on: 07 / November / 2018, 23:39:18 »

the camera no longer freezes

the AF LED turns on , turns off
there is a very small period it turns on then immediately turns off ..... maybe a few milliseconds... you could almost miss it

but the camera does not freeze

if i press the power button again it repeats the process

Logged