SX430 - This will be my first porting Attempt - page 14 - DryOS Development - CHDK Forum

SX430 - This will be my first porting Attempt

  • 166 Replies
  • 179344 Views
*

Offline reyalp

  • ******
  • 12149
Re: SX430 - This will be my first porting Attempt
« Reply #130 on: 24 / November / 2018, 21:32:35 »
Advertisements
This is checked in, not currently enabled in the autobuild.

One minor note:
If vid_get_viewport_fb_d is in platform lib.c (as opposed to the sub lib.c used in older ports),  it should use the variable output by the sig finder (viewport_fb_d) rather than the function that directly references the address.
The platform lib.c shouldn't refer to things like variable or ROM addresses that might vary between firmware versions. I made that change in r5128.

Hardware addresses (like raw_image_addr, bitmap_fb, MMIOs) are fine in platform lib.c, since they are not expected to vary between subs.
Don't forget what the H stands for.

*

Offline blackhole

  • *****
  • 684
  • A590IS 101b
    • Planetary astrophotography
Re: SX430 - This will be my first porting Attempt
« Reply #131 on: 25 / November / 2018, 08:42:04 »
This is checked in, not currently enabled in the autobuild.

One minor note:
If vid_get_viewport_fb_d is in platform lib.c (as opposed to the sub lib.c used in older ports),  it should use the variable output by the sig finder (viewport_fb_d) rather than the function that directly references the address.
The platform lib.c shouldn't refer to things like variable or ROM addresses that might vary between firmware versions. I made that change in r5128.

Hardware addresses (like raw_image_addr, bitmap_fb, MMIOs) are fine in platform lib.c, since they are not expected to vary between subs.
Thanks!
I understand what the problem is, thank you for fixing it for me.

*

Offline srsa_4c

  • ******
  • 4025
Re: SX430 - This will be my first porting Attempt
« Reply #132 on: 06 / December / 2018, 18:05:58 »
Just a note. The sigfinder currently does not detect CreateBinarySemaphore correctly (should be 0xff0280ac). Don't enable ARAM or EXMEM until it's fixed (I have a patch but the fix needs more considerations). This is the only port in svn that's affected.

edit:
issue fixed in revision 5136
« Last Edit: 07 / December / 2018, 17:57:02 by srsa_4c »

*

Offline blackhole

  • *****
  • 684
  • A590IS 101b
    • Planetary astrophotography
Re: SX430 - This will be my first porting Attempt
« Reply #133 on: 09 / December / 2018, 02:47:34 »
Just a note. The sigfinder currently does not detect CreateBinarySemaphore correctly (should be 0xff0280ac). Don't enable ARAM or EXMEM until it's fixed (I have a patch but the fix needs more considerations). This is the only port in svn that's affected.

edit:
issue fixed in revision 5136
Thanks for solving problems.


Re: SX430 - This will be my first porting Attempt
« Reply #134 on: 11 / March / 2019, 13:29:13 »
hey there! just wanna know if someone still working for this cam. firmware? coz i m eagerly waiting for it.
thnx in advance ✌️

*

Offline blackhole

  • *****
  • 684
  • A590IS 101b
    • Planetary astrophotography
Re: SX430 - This will be my first porting Attempt
« Reply #135 on: 11 / March / 2019, 18:03:25 »
Test build for firmware 100b attached.
Do not try to use this if you are not sure your camera has a 100b firmware version !

Re: SX430 - This will be my first porting Attempt
« Reply #136 on: 12 / March / 2019, 07:57:38 »
thnx @blackhole  for this file.
I hv downloaded camera window Dc s/w to check installed version of firmware, and it says ver.1.0.0.0. Does it mean that i hv 100b or not?

Re: SX430 - This will be my first porting Attempt
« Reply #137 on: 12 / March / 2019, 07:59:48 »
thnx @blackhole  for this file.
I hv downloaded camera window Dc s/w to check installed version of firmware, and it says ver.1.0.0.0. Does it mean that i hv 100b or not?
You can't get the firmware version that way and 1.0.0.0 is not the firmware version in your camera. 

I'd suggest using ACID or upload an image and someone will check the EXIF information for you.
« Last Edit: 12 / March / 2019, 08:12:42 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16


Re: SX430 - This will be my first porting Attempt
« Reply #138 on: 12 / March / 2019, 08:23:51 »
thnx @blackhole  for this file.
I hv downloaded camera window Dc s/w to check installed version of firmware, and it says ver.1.0.0.0. Does it mean that i hv 100b or not?
You can't get the firmware version that way and 1.0.0.0 is not the firmware version in your camera. 

I'd suggest using ACID or upload an image and someone will check the EXIF information for you.
oky! thnx . i ll try to use ACID, if something troubles me again, i ll post here. :)

Re: SX430 - This will be my first porting Attempt
« Reply #139 on: 12 / March / 2019, 12:45:12 »
Test build for firmware 100b attached.
Do not try to use this if you are not sure your camera has a 100b firmware version !
everything seems to be working with some bugs like...
Alt> menu keeps on disappearing while selecting options, enabling some options causing display to go black or red sometimes(don't know which option is causing this), MOST IMPO.  this cam don't have DISP. button, so the MANUAL FOCUS can't be turned on, pano mode isn't working ( display goes red or cam went hung when enabling edge overlay)
..
intrervalometer is working fi9,

 

Related Topics